JVC KS-FX811 Instructions Manual Download

Page: 22 / 25

ENGLISH

EXTERNAL COMPONENT OPERATIONS

Playing an external component

You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).

Preparations:

• For connecting the Line Input Adaptor KS-U57 and

the external component, refer to the Installation/
Connection Manual (separate volume).

• Before operating the external component using the

following procedure, select the external input
correctly. (See “To select the external component to
use – EXT IN” on page 18.)

Select the external component
(LINE IN).

• If “LINE IN” does not appear on the display, see

page 18 and select the external input (“LINE IN”).

• Displayed only when one of the following

sources is selected – FM, AM and tape.

Turn on the connected component
and start playing the source.

Adjust the volume.

Adjust the sound characteristics
you want. (See pages 13 – 15.)

Note on One-Touch Operation:

When you press TAPE CD-CH, the power
automatically comes on. You do not have to press

to turn on the power.

TAPE

Multi
Music
Scan

TAPE

LINE IN

(or CD)

TAPE

EN22-22KS-FX911_811[U]5.pm5

2/8/02, 12:26 PM

Summary of Contents for KS-FX811


























Search results

Summary of Contents for KS-FX811

Reviews:

Related manuals for KS-FX811

Brands by name

Popular brands

JVC KS-FX811, Instructions Manual

Search results

Summary of Contents for KS-FX811

Reviews:

Related manuals for KS-FX811

Brands by name

Popular brands