26
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Symptom
Remedy
General
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
“MISWIRING CHECK
WIRING THEN PWR ON”
appears.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power on
again.
“PROTECTING SEND
SERVICE” appears.
Send the unit to the nearest service center.
Source cannot be selected. Check the
[SOURCE SELECT]
setting. (Page 6)
The unit does not work
at all.
Reset the unit. (Page 4)
Correct characters are not
displayed.
• This unit can only display uppercase letters, numbers, and a
limited number of symbols.
• Depending on the display language you have selected
(page 6), some characters may not be displayed
correctly.
Radio
• Radio reception is poor.
• Static noise while
listening to the radio.
Connect the antenna firmly.
USB
Playback order is not as
intended.
USB device, the folders are played in the order of creation
(date and time). The files within each folder are played in
the order of the file name (alphabet).
Elapsed playing time is not
correct.
This depends on the recording process earlier (USB).
“NOT SUPPORT” appears
and file skips.
Check whether the file is a playable format.
(Page 25)
“READING” keeps flashing. • Do not use too many hierarchical levels and folders.
• Reattach the USB device.
Troubleshooting
Symptom
Remedy
USB
“UNSUPPORTED DEVICE”
appears.
• Check whether the connected USB device is compatible
with this unit and ensure the file systems are in supported
formats. (Page 25)
• Reattach the USB device.
“UNRESPONSIVE DEVICE”
appears.
Make sure the USB device is not malfunction and reattach
the USB device.
“USB HUB IS NOT
SUPPORTED” appears.
This unit cannot support a USB device connected via a USB
hub.
“CANNOT PLAY” appears.
Connect a USB device that contains playable audio files.
• The source does not
change to “USB” when
you connect a USB
device while listening to
another source.
• “USB ERROR” appears.
The USB port is drawing more power than the design limit.
Turn the power off and unplug the USB device. Then, turn
on the power and reattach the USB device.
If this does not solve the problem, turn the power off and
on (or reset the unit) before replacing with another USB
device.
“NO DEVICE”
Connect a USB device, and change the source to USB again.
Bluetooth®
No Bluetooth device is
detected.
• Search from the Bluetooth device again.
• Reset the unit. (Page 4)
Bluetooth pairing cannot
be made.
• Make sure you have entered the same PIN code to both the
unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. (Page 11)
Echo or noise is
heard during a phone
conversation.
• If clipping sound is occurred, turn the volume down.
• Check the
[ECHO CANCEL]
setting. (Page 13)
KD-X182BT_M_B5A-4092-00_EN_2nd Draft.indd 26
KD-X182BT_M_B5A-4092-00_EN_2nd Draft.indd 26
17/1/2022 1:27:47 PM
17/1/2022 1:27:47 PM
