6
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
To set the date
7
Turn the volume knob to select
[DATE SET]
, then press the knob.
8
Turn the volume knob to make the settings, then press the knob.
Set the date in the order of “Day” “Month” “Year”.
9
Press
to exit.
To return to the previous setting item, press
.
Set the basic settings
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[SYSTEM]
[KEY BEEP]
(Not applicable when 3-way crossover is selected.) (Page 19)
[ON]
: Activates the keypress tone. ;
[OFF]
: Deactivates.
[SOURCE SELECT]
[AM SRC]
*1
[ON]
: Enables AM in source selection. ;
[OFF]
: Disables. (Page 7)
[SW1 SRC]
*1
[ON]
: Enables SW1 in source selection. ;
[OFF]
: Disables. (Page 7)
[SW2 SRC]
*1
[ON]
: Enables SW2 in source selection. ;
[OFF]
: Disables. (Page 7)
[BT AUDIO SRC]
*1
[ON]
: Enables BT AUDIO in source selection. ;
[OFF]
: Disables.
(Page 17)
3
[F/W UPDATE]
*2
[UPDATE SYSTEM]
[F/W UP xxxx]
[YES]
: Starts upgrading the firmware. ;
[NO]
: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<https://www.jvc.net/cs/car/>.
[FACTORY RESET]
[YES]
: Resets the settings to default (except the stored station). ;
[NO]
: Cancels.
[CLOCK]
[TIME SYNC]
[ON]
: The clock time is automatically set using the Clock Time (CT) data in
FM Radio Data System signal. ;
[OFF]
: Cancels.
[CLOCK DISPLAY]
[ON]
: The clock time is shown on the display even when the unit is turned
off. ;
[OFF]
: Cancels.
[ENGLISH]
Select the display language for menu and music information if applicable.
By default,
[ENGLISH]
is selected.
[ESPANOL]
*1 Not displayed when the corresponding source is selected.
*2 Firmware downgrade is prohibited.
Getting Started
KD-X182BT_M_B5A-4092-00_EN_2nd Draft.indd 6
KD-X182BT_M_B5A-4092-00_EN_2nd Draft.indd 6
17/1/2022 1:27:44 PM
17/1/2022 1:27:44 PM
