ENGLISH
19
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
[CODE SET]
1
Press the volume knob to enter
[NEW CODE]
.
2
Turn the volume knob to select a number.
3
Press
S
/
T
to move to the entry position.
4
Repeat step 2 and step 3 to enter a new 4-digit pass code.
5
Press the volume knob to confirm.
6
Repeat step 2 to step 5 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings for
next time.
[LOCK SETTING]
[MATURE CH]
: Selects the SiriusXM-defined lock setting. ;
[USER DEFINED]
: Selects the individual channels the user wants to
lock. ;
[OFF]
: Cancels.
[CHANNEL EDIT]
*1
1
Turn the volume knob to select a category, then press the knob.
2
Turn the volume knob to select a channel you want to lock, then
press the knob.
“L” appears in front of the channel number.
3
Press and hold
to exit.
[CHANNEL CLEAR]
*1
[YES]
: Clears all the locked channels. ;
[NO]
: Cancels.
[TUNE START]
*2
[ON]
: All qualified music channels in the SmartFavorites will start
playback from the beginning of the song. ;
[OFF]
: Cancels.
[SIGNAL LEVEL]
Shows the strength (
[NO SIGNAL]
/
[WEAK]
/
[GOOD]
/
[STRONG]
) of
the current received signal.
[BUFFER USAGE]
Shows the memory usage (
[0%]
to
[100%]
) for Replay buffer.
[SXM RESET]
[YES]
: Resets all SiriusXM settings to default. ;
[NO]
: Cancels.
*1 Displayed only when
[LOCK SETTING]
is set to
[USER DEFINED]
.
*2 Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later which supports
SmartFavorites.
SiriusXM® Radio
(for KD-X470BHS/KD-X370BTS/KD-X37MBS)
Using Other Applications
JVC Remote application
You can control the JVC car receiver from the following device using
JVC Remote application.
• KD-X470BHS/KD-X370BTS/KD-X37MBS: iPhone/iPod touch (via Bluetooth
or via USB input terminal) or Android device (via Bluetooth)
• KD-X270BT/KD-SX26BT: Android device (via Bluetooth)
For more information, visit <http://www.jvc.net/cs/car/>.
Preparation:
Install the latest version of JVC Remote application on your device before
connecting.
Start using JVC Remote application
1
Start up the JVC Remote application on your device.
2
Connect your device.
• For Android device:
Pair the Android device with this unit via Bluetooth. (Page 21)
• For iPhone/iPod touch:
Connect iPhone/iPod touch to the USB input terminal. (Page 10)
(or)
Pair the iPhone/iPod touch with this unit via Bluetooth. (Page 21)
(Make sure the USB input terminal is not connected to any device.)
3
Select the device to use from the menu.
See the following “Settings to use JVC Remote application”.
For KD-X470BHS/KD-X370BTS/KD-X37MBS: By default,
[ANDROID]
is
selected. To use iPhone/iPod touch, select
[YES]
for
[IOS]
. (Page 20)
Settings to use JVC Remote application
1
Press and hold
.
2
Turn the volume knob to select an item (page 20), then press the
knob.
JS_JVC_KD_X470BHS_K_EN_2.indd 19
JS_JVC_KD_X470BHS_K_EN_2.indd 19
6/11/2019 8:25:48 AM
6/11/2019 8:25:48 AM
