ENGLISH
23
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
*1 This adjustment will not affect the volume of the other sources.
*2 Press and hold VOL + to continuously increase the volume to 15.
*3 Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone...
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[MIC GAIN]
[LEVEL –10]
to
[LEVEL +10]
(
[LEVEL –04]
): The sensitivity of the
microphone increases as the number increases.
[NR LEVEL]
[LEVEL –05]
to
[LEVEL +05]
(
[LEVEL 00]
): Adjust the noise reduction level
until the least noise is being heard during a phone conversation.
[ECHO CANCEL]
[LEVEL –05]
to
[LEVEL +05]
(
[LEVEL 00]
): Adjust the echo cancellation
delay time until the least echo is being heard during a phone conversation.
Make the settings for receiving a call
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected or activated.
To return to the previous setting item, press
.
Bluetooth®
Default:
[XX]
[SETTINGS]
[AUTO ANSWER] [01 SEC]
to
[30 SEC]
: Answers an incoming call automatically in the selected
time (in seconds). ;
[OFF]
: Cancels.
[RING COLOR]
KD-X470BHS/KD-X370BTS/KD-X37MBS:
[COLOR 01]
to
[COLOR 49]
(
[COLOR 08]
): Selects the illumination color for
the buttons as notification when there is an incoming call and during a call. ;
[OFF]
: Cancels.
[RING ILLUMI]
KD-X270BT/KD-SX26BT:
[BLINK 01]
to
[BLINK 05]
(
[BLINK 02]
): Selects the blinking pattern for the
buttons as notification when there is an incoming call. ;
[OFF]
: Cancels.
Make a call
You can make a call from the call history, phonebook, or dialing the number.
Call by voice is also possible if your mobile phone has the feature.
1
Press
to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetooth phones are connected, press
again to switch to
the other phone.
“(Second device name)” appears.
2
Turn the volume knob to select an item (page 24), then press the
knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
To return to the previous setting item, press
.
JS_JVC_KD_X470BHS_K_EN_1.indd 23
JS_JVC_KD_X470BHS_K_EN_1.indd 23
5/28/2019 1:34:18 PM
5/28/2019 1:34:18 PM
