19
ENGLISH
To set the clock display
– CLOCK DISP
You can set the clock to be shown on the display
when the unit is turned on.
When shipped from the factory, the clock is set to
be shown on the display.
• CLOCK ON:
Clock display is turned on.
• CLOCK OFF: Clock display is turned off.
To select the level meter
– LEVEL/EQ
You can select the level display according to your
preference.
When shipped from the factory, this mode is set to
“LEVEL+EQ.”
• EQ ONLY:
Equalizer pattern is displayed.
• LEVEL+EQ:
Equalizer pattern is displayed
along with audio level meter.
• LEVEL ONLY: Audio Level meter illuminates
upward and downward from
center.
To select the dimmer mode
– DIMMER
When you turn on the car headlights, the display
automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer
mode is activated.
• AUTO: Activates Auto Dimmer.
• OFF:
Cancels Auto Dimmer.
• ON:
Always dims the display.
Note:
Auto Dimmer equipped for this unit may not work
correctly on some vehicles, particularly on those having
a control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF.”
To turn on/off the key-touch tone
– BEEP SW
You can deactivate the key-touch tone if you do
not want it to beep each time you press a button.
When shipped from the factory, the key-touch tone
is activated.
• BEEP ON:
Activates the key-touch tone.
• BEEP OFF: Deactivates the key-touch tone.
To turn on/off the power amplifier switch
– P. AMP SW. (For KD-SH77 only)
You can switch off the built-in amplifier and send
the audio signals only to the external amplifier(s)
to get clear sounds and to prevent internal heat
buildup inside this unit.
When shipped from the factory, the power
amplifier switch is turned on so that the built-in
amplifier works.
• P. AMP ON: Select this mode when not using
external amplifier(s).
• P. AMP OFF: Select this mode when using
external amplifier(s).
To adjust the display contrast level
– CONTRAST
You can adjust the display contrast level among 1
(dark) to 10 (bright). When shipped from the
factory, the display contrast level is set at level 5.
To select the scroll mode
– SCROLL
You can select the scroll mode for the disc
information if it consists of more than 10
characters.
When shipped from the factory, Auto Scroll mode
is set to “ONCE.”
• ONCE:
Scrolls only once.
• AUTO:
Repeats the scroll (5-second
intervals in between).
• OFF:
Cancels Auto Scroll.
Note:
Even if the scroll mode is set to “OFF,” you can scroll
the display by pressing DISP (D) for more than 1
second.
To select the subwoofer cutoff frequency
– CUTOFF F (For KD-SH77 only)
When a subwoofer is connected to this unit,
select an appropriate cutoff frequency level for
your subwoofer.
When shipped from the factory, the subwoofer
cutoff frequency is set to “FREQ MID.”
• FREQ LOW: Frequencies higher than 50 Hz
are cut off to the subwoofer.
• FREQ MID:
Frequencies higher than 80 Hz
are cut off to the subwoofer.
• FREQ HIGH: Frequencies higher than 120 Hz
are cut off to the subwoofer.
EN17-23.KD-SH77_55[J]f
01.1.9, 4:32 PM
19
