JVC KD-S871R Service Manual Download Page 4

Page: 4 / 50

1-4

KD-S871R

Important for laser products

1.CLASS 1 LASER PRODUCT

2.DANGER : Invisible laser radiation when open and inter

lock failed or defeated. Avoid direct exposure to beam.

3.CAUTION : There are no serviceable parts inside the

Laser Unit. Do not disassemble the Laser Unit. Replace

the complete Laser Unit if it malfunctions.

4.CAUTION : The compact disc player uses invisible

laserradiation and is equipped with safety switches

whichprevent emission of radiation when the drawer is

open and the safety interlocks have failed or are de

feated. It is dangerous to defeat the safety switches.

5.CAUTION : If safety switches malfunction, the laser is able

to function.

6.CAUTION : Use of controls, adjustments or performance of

procedures other than those specified herein may result in

hazardous radiation exposure.

VARNING : Osynlig laserstrålning är denna del är öppnad

och spårren är urkopplad. Betrakta ej strålen.

VARO : Avattaessa ja suojalukitus ohitettaessa olet

alttiina näkymättömälle lasersäteilylle.Älä katso

säteeseen.

ADVARSEL : Usynlig laserstråling ved åbning , når

sikkerhedsafbrydere er ude af funktion. Undgå

udsættelse for stråling.

ADVARSEL : Usynlig laserstråling ved åpning,når

sikkerhetsbryteren er avslott. unngå utsettelse

for stråling.

REPRODUCTION AND POSITION OF LABELS

WARNING LABEL

DANGER : Invisibie laser

radiation when open and

interlock or defeated.

AVOID DIRECT EXPOSURE

TO BEAM (e)

VARNING : Osynlig laser-

strålning är denna del

är öppnad och spårren är

urkopplad. Betrakta ej

strålen. (s)

VARO : Avattaessa ja suo-

jalukitus ohitettaessa olet

alttiina näkymättömälle

lasersäteilylle.Älä katso

säteeseen. (d)

ADVARSEL :Usynlig laser-

stråling ved åbning , når

sikkerhedsafbrydere er ude

af funktion. Undgå udsæt

telse for stråling. (f)

CLASS 1
LASER PRODUCT

! CAUTION Please use enough caution not to

see the beam directly or touch it
in case of an adjustment or operation
check.

Summary of Contents for KD-S871R



















































Search results

Summary of Contents for KD-S871R

Reviews:

Related manuals for KD-S871R

Brands by name

Popular brands

JVC KD-S871R, Service Manual

Search results

Summary of Contents for KD-S871R

Reviews:

Related manuals for KD-S871R

Brands by name

Popular brands