ENGLISH
37
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Part list for installation
Basic procedure
1
Remove the key from the ignition switch, then disconnect
the terminal of the car battery.
2
Connect the wires properly.
See Wiring connection.
( 38)
3
Install the unit to your car.
See Installing the unit (in-dash mounting).
4
Connect the terminal of the car battery.
5
Press source button to turn on the power.
6
Detach the faceplate and reset the unit within 5 seconds.
( 3 or 4)
(A)
Faceplate
INSTALLATION/CONNECTION
How to remove the unit
When installing without the mounting sleeve
1
Remove the mounting sleeve and trim plate from the unit.
2
Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with screws
(commercially available).
Use only the specified screws. Using wrong screws might damage
the unit.
Installing the unit (in-dash mounting)
Do the required wiring.
( 38)
Bend the appropriate tabs to
hold the sleeve firmly in place.
Hook on the top side
Orientate the trim plate
as illustrated before
fitting.
Dashboard of
your car
(C)
Mounting sleeve
(B)
Trim plate
(D)
Wiring harness
(E)
Extraction key
JS_JVC_KD_R991BT_M_EN_2.indd 37
JS_JVC_KD_R991BT_M_EN_2.indd 37
7/24/2017 10:08:00 AM
7/24/2017 10:08:00 AM