ENGLISH
17
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Make the settings for receiving a call
1
Press
to enter Bluetooth mode.
2
Perform ‘select an item
( 3
or
4)
’ operation to select
an item
(
see the following table
)
.
3
Repeat step
2
until the desired item is selected or activated.
To return to the previous setting item, press
.
Default:
XX
SETTINGS
AUTO ANSWER
01 SEC
to
30 SEC
: The unit answers incoming call
automatically in the selected time (in seconds). ;
OFF
: Cancels.
RING COLOR
KD-R991BT
/
KD-R891BT
:
COLOR 01
to
COLOR 49
(
COLOR 08
): Selects the illumination
color for the symbolic button as notification when there is an
incoming call and during a call. ;
OFF
: Cancels.
RING ILLUMI
KD-R792BT
:
BLINK 01
to
BLINK 05
(
BLINK 02
): Selects the blinking
pattern for the buttons as notification when there is an
incoming call. ;
OFF
: Cancels.
BATT/SIGNAL
*
KD-R991BT
/
KD-R891BT
:
AUTO
: Shows the strength of the battery and signal when the
unit detects a Bluetooth device and the Bluetooth device is
connected. ;
OFF
: Cancels.
*
Functionality depends on the type of the phone used.
BLUETOOTH®
Make a call
You can make a call from the call history, phonebook, or dialing the number. Call
by voice is also possible if your mobile phone has the feature.
1
Press
to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetooth phones are connected, press
again to switch to
another phone.
“(Second device name)” appears.
2
Perform ‘select an item
( 3
or
4)
’ operation to select an item
(
see the
following table
)
.
3
Repeat step
2
until the desired item is selected/activated or follow the
instructions stated on the selected item.
To return to the previous setting item, press
.
RECENT CALL
(Applicable only if the phone supports PBAP.)
1
Press the following button to select a name or a phone number.
KD-R991BT
/
KD-R891BT
:
KD-R792BT
: volume
knob
• “<” indicates call received, “>“ indicates call made, “M” indicates call missed.
• “NO HISTORY” appears if there is no recorded call history or call number.
2
Press the following to call.
KD-R991BT
/
KD-R891BT
:
KD-R792BT
: volume
knob
PHONEBOOK
(Applicable only if the phone supports PBAP.)
1
Press
to select the desired letter (A to Z, 0 to 9, and OTHERS).
• “OTHERS” appears if the first character is other than A to Z, 0 to 9.
2
Perform ‘select an item
( 3
or
4)
’ operation to select a name.
3
Perform ‘select an item
( 3
or
4)
’ operation to select a phone number
and to call.
• The phonebook of the connected phone is automatically transferred to the unit
when pairing.
• This unit can display only non-accent letters. (Accent letters such as “Ú” is showns
as “U”.)
JS_JVC_KD_R991BT_M_EN_2.indd 17
JS_JVC_KD_R991BT_M_EN_2.indd 17
7/24/2017 10:07:30 AM
7/24/2017 10:07:30 AM
