JVC KD-R605 Instructions Manual Download Page 34

Page: 34 / 42

ENGLISH

Symptoms

Remedies/Causes

iPod/iPhone

• The iPod does not turn on or does not work.

• Check the connecting cable and its connection.
• Update the firmware version of the iPod/

iPhone.

• Charge the battery of the iPod/iPhone.
• Reset the iPod/iPhone.
• Check whether “

IPOD SWITCH

” setting is

appropriate (see page 26).

• The sound is distorted.

Deactivate the equalizer either on this unit or the
iPod/iPhone.

• No sound can be heard in “

IPOD MODE

.”

Check whether “

IPOD SWITCH

” setting is

appropriate (see page 26).

• Playback stops.

The headphones are disconnected during
playback. Restart the playback operation (see
pages 17 and 18).

• “CANNOT PLAY” appears on the display.

No tracks are stored. Import tracks to the
iPod/iPhone.

• “RESTRICTED” appears on the display.

Check whether the connected iPod/iPhone is
compatible with this unit (see page 30).

Only when connecting with the interface

adapter

• “NO FILES” appears on the display.

No tracks are stored. Import tracks to the iPod.

• The iPod’s controls do not work after

disconnecting from this unit.

Reset the iPod.

• “NO IPOD” appears on the display.

• Check the connecting cable and its connection.
• Charge the battery.

• No sound can be heard when connecting

an iPod nano.

• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.

• “RESET 1” – “RESET 7” appears on the

display.

Disconnect the adapter from both this unit and
iPod. Then, connect it again.

• “RESET 8” appears on the display.

Check the connection between the adapter and
this unit.

• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Victor

Company of Japan, Limited (JVC) is under license. Other trademarks and trade names are those of their respective
owners.

• “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been

certified by the developer to meet Apple performance standards.

• “Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and

has been certified by the developer to meet Apple performance standards.

•  Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
•  iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
•  iPhone is a trademark of Apple Inc.

EN28-37_KD-R606_001A_f.indd 34

12/24/08 11:54:02 AM

Summary of Contents for KD-R605











































Search results

Summary of Contents for KD-R605

Reviews:

Related manuals for KD-R605

Brands by name

Popular brands

JVC KD-R605, Instructions Manual

Search results

Summary of Contents for KD-R605

Reviews:

Related manuals for KD-R605

Brands by name

Popular brands