ENGLISH
23
EXTERNAL DEVICES
Listening to the DAB tuner
Before operating, connect the
JVC DAB tuner
, KT-DB1000 (not supplied) to the CD changer jack on the rear of the
unit.
Preparation:
Make sure “
CH/IPOD
” is selected in the “
SRC SELECT
”
=
“
EXT IN
” setting, see page 30.
1
Select “DAB.”
2
Searching for an ensemble.
When an ensemble is tuned in, searching stops. To stop searching, press the same button
again.
• You can also search for an ensemble manually—Manual Search. Hold either one of the
buttons until “M” flashes on the display, then press it repeatedly.
3
Select a service (either primary or secondary) to listen to.
Storing DAB services in memory
You can preset six DAB services (primary).
Ex.: Storing an ensemble (primary service) into the
preset number “04.”
1
Select a service you want (see steps
1
to
3
above).
2
Select preset number “04.”
3
Tuning in to a preset DAB service
Tracing the same programme—
Alternative Frequency Reception
(DAB AF)
You can keep listening to the same programme by
activating the Alternative Frequency Reception.
•
While receiving a DAB service:
When driving in an area where a service cannot
be received, this unit automatically tunes in to
another ensemble or FM Radio Data System station,
broadcasting the same programme.
•
While receiving an FM Radio Data System
station:
When driving in an area where a DAB service is
broadcasting the same programme as the FM
Radio Data System station is broadcasting, this unit
automatically tunes in to the DAB service.
When shipped from the factory, Alternative Frequency
Reception is activated.
To deactivate the Alternative Frequency
Reception,
see page 28.
[Turn]
=
[Press]
EN14-25_KD-R601_003A_4.indd 23
EN14-25_KD-R601_003A_4.indd 23
19/12/08 11:33:19 AM
19/12/08 11:33:19 AM
