ENGLISH
14
SETTINGS
Category Menu items
Selectable settings, [reference page]
TUNER
AF-REG
*
4
Alternative
frequency/
regionalization
reception
•
AF ON
•
AF-REG ON
•
OFF
: When the currently received signals become weak, the unit
switches to another station (the programme may differ
from the one currently received), [9].
• The AF indicator lights up.
: When the currently received signals become weak, the
unit switches to another station broadcasting the same
programme.
• The AF and REG indicators light up.
: Cancels.
PTY-STANDBY
*
4
PTY standby
PTY OFF, PTY
codes
Activates PTY Standby Reception with one of the PTY codes,
[9].
TA VOLUME
*
4
Traffic
announcement
volume
VOLUME 00
–
VOLUME 50
(or
VOLUME 00
–
VOLUME 30
)
*
5
Initial: VOLUME 15
P-SEARCH
*
4
Programme search
•
SEARCH ON
•
SEARCH OFF
: Activates Programme Search, [9].
: Cancels.
MONO
*
6
Monaural mode
•
MONO ON
•
MONO OFF
: Activate monaural mode to improve FM reception, but
stereo effect will be lost, [7].
: Restore the stereo effect.
IF BAND
Intermediate
frequency band
•
AUTO
•
WIDE
: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
: Subject to interference noises from adjacent stations, but
sound quality will not be degraded and the stereo effect
will remain.
AUDIO
FADER
*
7
Fader
R06 – F06
: Adjust the front and rear speaker output balance.
[Initial: 00]
BALANCE
Balance
L06 – R06
: Adjust the left and right speaker output balance.
[Initial: 00]
LOUD
Loudness
•
LOUD OFF
•
LOUD ON
: Cancels.
: Boost low and high frequencies to produce a well-balanced
sound at a low volume level.
AUX ADJUST
Auxiliary input
level adjustment
AUX ADJ 00
— AUX ADJ 05
: Adjust the auxiliary input level to avoid the sudden
increase of the output level when changing the source to
external component connected to the AUX input jack on
the control panel.
*
4
Only for FM Radio Data System stations.
*
5
Depends on the amplifier gain control.
*
6
Displayed only when the source is “FM.”
*
7
If you are using a two-speaker system, set the fader level to “00.”
EN10-17_KD-R303_003A_f.indd 14
EN10-17_KD-R303_003A_f.indd 14
12/9/08 5:56:56 PM
12/9/08 5:56:56 PM