1-8 (No.MA384<Rev.001>)
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
SECTION 3
DISASSEMBLY
3.1
Main body (used figure is KD-G343)
3.1.1 Removing the FRONT CHASSIS assembly (See Fig.1, 2)
(1) Remove the two screws
A
attaching the FRONT CHASSIS
assembly. (See Fig.1)
(2) Remove the two screws
B
attaching the both side of the
FRONT CHASSIS assembly.(See Fig.2)
(3) Disengage the four hooks
a
engaged the both side of the
FRONT CHASSIS assembly. (See Fig.2)
Fig.1
Fig.2
3.1.2 Removing the HEAT SINK (See Fig.3, 4)
(1) Remove the four screws
C
and the two screws
D
attaching
the HEAT SINK. (See Fig.3)
(2) Remove the two screws
E
and the one screw
F
attaching
the HEAT SINK. (See Fig.4)
Fig.3
Fig.4
A
hook
a
B
C
D
E
F
