48
• If the iPod does not play correctly, please update your
iPod software to the latest version. For details about
updating your iPod, visit <http://www.apple.com>.
• When you turn on this unit, the iPod is charged
through this unit.
• The text information may not be displayed correctly.
• If the text information includes more than
11 characters, it scrolls on the display.
This unit can display up to 40 characters for “
IPOD
”
and up to 128 characters for “
USB (iPod)
.”
Notice:
When operating an iPod, some operations may not
be performed correctly or as intended. In this case,
visit the following JVC web site:
<http://www.jvc.co.jp/english/car/> (English
website only)
Menu operations
• <
AUTO
> setting for <
DIMMER
> may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, change the <
DIMMER
> setting to any
other than <
AUTO
>.
• If you change the <
AMP GAIN
> setting from
<
HIGH POWER
> to <
LOW POWER
> while the
volume level is set higher than “VOLUME 30,” the
unit automatically changes the volume level to
“VOLUME 30.”
Title assignment
• If you try to assign titles to more than 30 station
frequencies, “NAME FULL” appears. Delete unwanted
titles before assignment.
Disc setup menu
• When the language you have selected is not recorded
on a disc, the original language is automatically used
as the initial language. In addition, for some discs,
the initial languages settings will not work as you set
due to their internal disc programming.
• When you select “16:9” for a picture whose aspect
ratio is 4:3, the picture slightly changes due to the
process for converting the picture width.
• Even if “4:3 PAN SCAN” is selected, the screen size
may become “4:3 LETTERBOX” for some discs.
About sounds reproduced through the rear
terminals
•
Through the analog terminals (Speaker
out/LINE OUT):
2-channel signal is emitted. When playing a
multi-channel encoded disc, multi-channel
signals are downmixed. (AUDIO—DOWN MIX:
see page 43.)
•
Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital, MPEG
Audio) are emitted through this terminal. (For
more details, see table on page 49.)
To reproduce multi-channel sounds such as Dolby
Digital and MPEG Audio, connect an amplifier or
a decoder compatible with these multi-channel
sources to this terminal, and set “DIGITAL AUDIO
OUTPUT” correctly. (See page 43.)
EN46-51_KD-DV5506_001A_f.indd 48
EN46-51_KD-DV5506_001A_f.indd 48
2/24/09 3:16:30 PM
2/24/09 3:16:30 PM
