23
OPERATIONS & EXTERNAL DEVICES
Cautions:
• Avoid using the USB device if it might hinder your safety driving.
• While “READING” is shown on the display:
– Do not pull out and attach the USB device repeatedly.
– Do not pull out or attach another USB device.
• Do not start the car engine if a USB device is connected.
• This unit may not be able to play the files depending on the type of USB device.
• Operation and power supply may not work as intended for some USB devices.
• You cannot connect a computer to the USB input terminal of the unit.
• Make sure all important data has been backed up to avoid losing the data.
• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause
damages to the device.
• Some USB devices may not work immediately after you turn on the power.
• The detect time and response time may be very long for some USB devices (such as Digital Audio Player, HDD,
etc.).
• For more details about USB operations, see pages 46 and 47.
Using the Bluetooth ® devices
For Bluetooth operations, it is required to connect the
Bluetooth adapter
(KS-BTA200) (not supplied) to the CD
changer jack on the rear of this unit.
• Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to check the countries where you may use the Bluetooth ® function.
To use a Bluetooth device through the unit (“
BT-PHONE
” and “
BT-AUDIO
”) for the first time, you need to
establish Bluetooth wireless connection between the unit and the device.
• Once the connection is established, it is registered in the unit even if you reset your unit. Up to five devices can be
registered in total.
• Only one device can be connected at a time for each source (“
BT-PHONE
” and “
BT-AUDIO
”).
See page 47 about warning messages for Bluetooth operations.
EN18-25_KD-DV5506_001A_2.indd 23
EN18-25_KD-DV5506_001A_2.indd 23
2/2/09 5:19:35 PM
2/2/09 5:19:35 PM
