22
Menu
Item
Setting
LANGUAGE
MENU LANGUAGE
Select the initial disc menu language. Refer also to “Language codes” on page 23.
AUDIO LANGUAGE
Select the initial audio language. Refer also to “Language codes” on page 23.
SUBTITLE
Select the initial subtitle language or remove the subtitle (OFF). Refer also to
“Language codes” on page 23.
ON SCREEN
LANGUAGE
Select the language for the on screen display.
PICTURE
MONITOR TYPE
Select the monitor type to watch a wide screen picture on your monitor.
OSD POSITION
Select the on-screen bar position on the monitor.
•
1
:
Higher position
•
2
:
Lower position (Guidance below the DVD setup menu
will disappear.)
AUDIO
DIGITAL AUDIO
OUTPUT
Select the signal format to be emitted through the DIGITAL OUT (Optical)
terminal.
•
PCM ONLY
:
Select for an amplifier or a decoder incompatible with
Dolby Digital, DTS, MPEG Audio, or connecting to a
recording device.
•
DOLBY DIGITAL/PCM
: Select for an amplifier or a decoder compatible with
Dolby Digital.
•
STREAM/PCM
:
Select for an amplifier or a decoder compatible with
Dolby Digital, DTS, and MPEG Audio.
DOWN MIX
When playing back a multi-channel disc, this setting affects the signals
reproduced through the LINE OUT jacks (and through the DIGITAL OUT terminal
when “PCM ONLY” is selected for “DIGITAL AUDIO OUTPUT”).
•
DOLBY SURROUND
:
Select to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby
Surround.
•
STEREO
:
Normally select this.
D. RANGE
COMPRESSION
You can enjoy a powerful sound at low or middle volume levels while playing a
Dolby Digital software.
•
AUTO
:
Select to apply the effect to multi-channel encoded
software (excluding 1-channel and 2-channel
software).
•
ON
:
Select to always use this function.
EN20-25_KD-DV4206_005A_f.indd 22
EN20-25_KD-DV4206_005A_f.indd 22
12/21/05 10:49:07 AM
12/21/05 10:49:07 AM