32
SETTINGS & REFERENCES
3
Assign a title.
1
Press number button 4 (
) repeatedly
to select a character set.
2
Turn the control dial to select a character. (For
available characters, see below.)
3
Use
4
/
¢
to move to the next (or
previous) character position.
4
Repeat steps
1
to
3
until you finish entering
the title.
4
Store the title.
To erase the entire title
In step
3
on page 31...
Available characters
Upper case
Lower case
Numbers and symbols
More about this unit
Basic operations
Turning on the power
• By pressing SOURCE on the unit, you can also turn on
the power. If the source is ready, playback also starts.
Turning off the power
• If you turn off the power while listening to a track,
playback will start from where it had been stopped
previously next time you turn on the power.
General
• If you change the source while listening to a disc,
playback stops.
Next time you select “CD” as the playback source,
playback will start from where it had been stopped
previously.
• After ejecting a disc or removing a USB device,
“No Disc” or “No USB” appears and you cannot
operate some of the buttons. Insert another disc,
reattach a USB device, or press SOURCE to select
another playback source.
Tuner operations
Storing stations in memory
• During SSM search...
– All previously stored stations are erased and the
stations are stored anew.
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in No. 1 will
be automatically tuned in.
• When storing a station manually, the previously
preset station is erased when a new station is stored
in the same preset number.
EN30-37_KD-BT22MP[U]_f.indd 32
EN30-37_KD-BT22MP[U]_f.indd 32
29/5/09 10:53:55 AM
29/5/09 10:53:55 AM