1-30 (No.MA184)
3.4.9 Removing the DVD pickup
(See Figs.17 to 19)
• Remove the front end board.
(1) From the bottom of the body, turn the feed gear in the di-
rection of the arrow to move the DVD pickup outwards.
(See Fig.17.)
(2) Remove the screw
G
attaching the thrust spring. (See
Fig.17.)
(3) Remove the DVD pickup assembly upward on the L.S.
gear side and release from sub shaft at joint
s
. Move the
lead screw of the DVD pickup assembly in the direction of
the arrow to release from joint
t
. (See Fig.18.)
(4) Remove the screw
H
attaching the rack spring/ rack plate
on the DVD pickup. (See Fig.19.)
(5) Pull out the lead screw. (See Fig.19.)
Caution:
• When releasing the lead screw, the L.S. collar comes off at
the end of the lead screw. When reassembling, reattach the
L.S. collar to the lead screw. (See Fig.19.)
• After reattaching the L.S. collar, reattach it to the point
t
of
the lead screw, and to the holder (M). Make sure that the
L.S. collar is set on the lod (M). (See Fig.18.)
• Perform adjustment after replacing the pickup.
Fig.18
Fig.19
G
Feed gear
DVD mechanism assembly
s
t
L.S. collar
Lod(M)
L.S. gear
Lead screw
Sub shaft
DVD pickup assembly
Holder(M)
H
Rack spring
Rack plate
L.S. collar
DVD pickup
Lead screw
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
