1-16 (No.MA184)
3.2.4 Removing the third gear, worm gear and double worm
(See Figs.6 to 11)
• Remove the display drive unit and cover.
(1) Remove the wire sheet with the wire from the motor. (See
Fig.6.)
Reference:
Disconnect the wire from the connector
CN332
on the
motor board as required.
(2) Disconnect the wire from the connector
CN312
on the mo-
tor board. (See Fig.7.)
(3) Remove the two screws
D
attaching the motor bracket (S).
(See Fig.7.)
(4) Take out the motor bracket (S), worm guide, motor and
third gear together. (See Fig.7.)
(5) Pull the third gear out of the motor bracket (S) in the direc-
tion of the arrow. (See Fig.8.)
(6) Remove the two screws
E
attaching the motor and remove
the motor from the motor bracket (S). (See Fig.9.)
(7) Pull the worm gear out of the motor. (See Fig.10.)
Reference:
When inserting the warm gear in the shaft of the motor,
insert it by a measurement of a rule. (See Fig.10.)
(8) From the top side of the display drive unit, pull the double
worm in an upward direction. (See Fig.11.)
Fig.6
Fig.7
Fig.8
Wire sheet
Motor board
CN332
Motor
Wire
Third gear
Motor board
CN312
Worm guide
Motor bracket (S)
Motor
D
D
Motor bracket (S)
Third gear
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
