(No.MA247)1-13
3.1.6 Removing the main board
(See Figs.6 and 7)
• Remove the front panel assembly, bottom cover and side pan-
el.
Reference:
Remove the front chassis assembly as required.
(1) Remove the screws
E
attaching the rear bracket on the
back side of the main body. (See Fig.6.)
Reference:
The quantity of a screw
E
differs by each model.
(2) Remove the screw
G'
attaching the USB board on the front
side of the main body. (See Fig.7.)
(3) Remove the three screws
H
attaching the main board. (See
Fig.7.)
(4) Disconnect the connector
CN501
on the main board from
the main body and take out the main board with the rear
bracket. (See Fig.7.)
Reference:
Remove the rear bracket from the main body as re-
quired. (See "3.1.5 Removing the rear bracket".)
Fig.7
3.1.7 Removing the CD mechanism assembly
(See Fig. 8)
• Remove the front panel assembly, bottom cover, side panel,
rear bracket and main board.
Reference:
Remove the front chassis assembly as required.
(1) Remove the three screws
J
attaching the CD mechanism
assembly on the top chassis.
(2) Take out the CD mechanism assembly.
Fig.8
Main board
USB board
H
G'
H
CN501
Rear bracket
J
J
CD mechanism assembly
Top chassis
Summary of Contents for KD-AR770J
