30
NETWORK PACK SETUP
CAMERA CONTROL screen
When the correct user ID and password are accepted, the following Streamcorder screen appears.
Camera adjustments of GY-DV300 can be made in the CAMERA CONTROL screen.
Setting range
●
When setting AUTO to ON, items other than BARS will not be available.
●
When setting BARS to ON, all other items will not be available.
●
When setting GAIN to ALC, IRIS and SHUTTER will not be available.
CAMERA CONTROL
FULL AUTO
BARS
WHITE BAL
IRIS
GAIN
SHUTTER
ZOOM
OK
CANCEL
AUTO
MANUAL
Lolux
ALC
STEP
0dB
STEP
OFF
WIDE
TELPHOTO
STOP
ON
ON
FAW
JVC
NETWORK PACK
KA-DV300
NETWORK
PACK
SETUP
NETWORK
PORT SETUP
ENCODE
PARAMETERS
CAMERA
CONTROL
CONTROL
STREAM
CAPTURE
VTR
SETUP
0
Screen selection
Clicking will display the se-
lected screen.
Clicking the OK icon will
confirm the inputted set-
ting.
Setting
Select the setting from the
pull-down menu.
Adjustment mode selection
Check the desired adjust-
ment mode.
Item
AUTO
BARS
WHITE BAL
IRIS
GAIN
SHUTTER
ZOOM
Adjustment mode
AUTO
MANUAL
Lolux
ALC
STEP
0dB
STEP
OFF
WIDE
TELEPHOTE
STOP
Setting/description
ON:
Auto mode on. Items other than BARS cannot be set.
OFF: Auto mode off
ON:
Color bar signals are outputted. Other items cannot be set.
OFF: Color bar signals are not outputted.
FAW: Full white balance mode
PRESET: White balance will be in the preset state. (3200K)
MEMORY 1 ~ 3: White balance setting stored in the GY-DV300 memory will be used.
Auto iris mode. Iris will be adjusted within the following range:
[–3, –2, –1, 0, 1, 2, 3,]
Manual iris mode. Iris will be adjusted within the following range:
[CLOSE, F16, F11, F8, F5.6, F4, F2.8, F2, F1.6]
Lolux mode
ALC (Auto Level Control) mode. IRIS and SHUTTER cannot be set
Gain can be set within the following range. (1 dB steps)
[–3dB ~ 0dB ~ 18dB]
0dB (Sensitivity is not increased)
Shutter speed can be set within the following range:
[1/100 (1/120), 1/250, 1/500, 1/1000, 1/2000]
( ): for E model
Shutter speed will be 1/60 (1/50).
( ): for E model
Zoom is set to WIDE. The zoom will move from the current position to WIDE in the following rate.
[0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
Zoom is set to TELEPHOTE. The zoom will move from the current position to TELE in the following rate.
[0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
Use this setting when not using zoom.
31
NETWORK PACK SETUP
NETWORK SETUP screen
Clicking NETWORK SETUP on the left of the Streamcorder screen displays the NETWORK SETUP screen for performing network
related settings.
NETWORK SETUP
HOST NAME
OK
CANCEL
JVC
NETWORK PACK
KA-DV300
NETWORK
PACK
SETUP
NETWORK
PORT SETUP
ENCODE
PARAMETERS
CAMERA
CONTROL
CONTROL
STREAM
CAPTURE
VTR
SETUP
IP ADDRESS
NETMASKS
GATEWAY
255. 255. 255. 000
192. 168. 100. 101
192. 168. 100. 254
none
Screen selection
Input
Clicking the OK icon will
confirm the inputted set-
ting.
Contact your network administrator for any unclear points concerning network settings.
Item
HOST NAME
IP ADDRESS
NETMASK
GATE WAY
Description
Factory setting
The host name can be set. (Max: 64 alphanumerical characters)
none
The IP address can be set. (Max: 12 numerical characters) (
☞
page 11)
192.168.100.101
The subnet mask can be set. (Max: 12 numerical characters) (
☞
page 11)
255.255.255.000
The gateway address can be set. (Max: 12 numerical characters) (
☞
page 11)
192.168.100.254
Caution
When changing the IP address in the Streamcorder screen, set the browser URL of the PC
again. (
☞
operation
7.
on pages 29)