JVC JD-G725, Installation & Connection Manual

Page: 2 / 4

* 1
When you stand the unit,
be careful not to damage the
fuse on the rear.
* 1
઱቎৹ʹጅइçʮ˻ʿ࠱
๑ᖢנ௰ڄۘᎳീé
INSTALLATION (IN-DASH MOUNTING)
The following illustration shows a typical installation. If you have any questions or require information
regarding installation kits, consult your JVC car audio dealers or a company supplying kits.
• If you are not sure how to install this unit correctly, have it installed by a qualified technician.
Removing the unit
Before removing the unit, release the rear section.
2
TROUBLESHOOTING
• The fuse blows.
* Are the red and black leads connected correctly?
• Power cannot be turned on.
* Is the yellow lead connected?
• No sound from the speakers.
* Is the speaker output lead short-circuited?
• Sound is distorted.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in common?
• Noise interfere with sounds.
* Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?
• This unit becomes hot.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in common?
• This unit does not work at all.
* Have you reset your unit?
ϰ༬༬௏éׇ֤ϛᄮڸؼ˗
ʓࡒڄ࿌༱ڷΕʄյܓڄϯ༫ദҺéϨس઱Љ੕ᖅç׻ᄔ࠱Љᘕ਎ࢭ˔άڄཊऄçቁώ
JVC
ԆԾࡖᛏ˜ኀੋ׻਎ࢭ˔άաᏻ˙͌༿੕é
ëϨس઱ʿ঻ᇧ׆Ϩщ͸ᇧϙϯ༫ʹጅçᏻቁϐतڄӑிʆ࢜գϯ༫é
Do the required electrical connections.
නм׿ᄔڄྐཔ௤૊é
Bend the appropriate tabs to hold the
sleeve firmly in place.
Ҿᛮጅೋڄߴдçӕ͙ࢭጅೋԕ֣Ϛᄭ
ڷػ˖é
؜։͵ጆ
Ϛ؛ֈʹጅۮçᏻઅʹጅ݈௰ڄ֣׆֜௤૊௰˜ᖑළé
Insert the two handles, then pull them as
illustrated so that the unit can be removed.
ݝ࿌׿Εçઅղ̕ػ଍ܓӕ˾಍ʈ̿ᆥç೸݈ძᗌ
ϙનղ਴ώ͙؁ղ̕ӕ˾çʹጅᎲ˃؁̳é
When using the optional stay /
ࠝ᎛Έ́ᆊނ
Screw (option)
ᒘീਐ᎚·ڄ
Stay (option)
̀ᆉށ᎚·ڄ
Fire wall
Վ̑ػ
Dashboard
ᄭڷػ
Install the unit at an angle of less than 30˚.
અʹጅϯ༫Ϛ˲ؠ
30˚
ڄԴܾé
When installing the unit without using the sleeve / ࠝˀՠΈ͚ࢮጆೌϰ༬͵ጆ
In a Toyota car for example, first remove the car radio and install the unit in its place.
̣ᕙΉ೻
(TOYOTA)
ԆԾ޴բ ࡛ζ֊̳ԆԾЂࡖጅç೸݈અʹጅ༫ʈմڏ̳ڄт໯é
*
2 Not supplied for this unit.
* 2 ʿᎲʹጅಏաé
Flat type screws (M5
×
8 mm)
* 2
ͦᏃᒘീਐ
(M5 × 8 mm)
* 2
Pocket
ڏೋ
Flat type screws (M5
×
8 mm)
*
2
ͦᏃᒘീਐ
(M5 × 8 mm)
* 2
Bracket
* 2
Ёࣙ
* 2
Bracket
* 2
Ёࣙ * 2
Note :
When installing the unit on the mounting bracket, make sure to use the 8 mm-long screws. If longer screws are
used, they could damage the unit.
ٍิ ! ӕʹጅϯ༫ϚЁࣙʕइçੀͫ՟· 8 mm ۂڄᒘീਐéϨ՟·ཫۂڄᒘീਐç๡๑ᖢʹጅé
ݮᄑ૜ਜ
•
ۙᎴുጜᔄê
* ᐓފ߹и዗ለ૊Ꮓ֜෨и዗ለ૊ᏃݵѴ૊᙮͸ᇧ%
•
ྑກˀ়ો௣ê
* ᐓފ෦и዗ለ૊ᏃݵѴ૊ʕ%
•
ಚᑶወԆЊᑶࡗê
* ᐓފಙᑵ዇᎔̳዗ለ૊ᏃݵѴഠཔ%
•
ᑶࡗ͜ॳê
* ᐓފಙᑵ዇᎔̳ၷʪݵѴ૊ϙ%
*
ᐓފಙᑵ዇ڄͣ
(L)
è͆
(R)
ၷʪڄ࠷๨
(–)
ݵѴθψ૊ϙ%
•
዇ࡗʹᓿࡗᛐê
* ݈૊ϙၷʪႩԾԽݵѴ՟·ཛഠ֜ཛ۹ڄྐለ௤૊%
•
͵ጆഛᇋê
* ᐓފಙᑵ዇᎔̳ၷʪݵѴ૊ϙ%
*
ᐓފಙᑵ዇ڄͣ
(L)
è͆
(R)
ၷʪڄ࠷๨
(–)
ݵѴθψ૊ϙ%
• ͵ጆҭθˀ়ይіê
*
઱ݵѴʵ໩ࡌ໯઱ڄጅஇ%
Instal1-2_KD-G725_010A_1.indd 2 Instal1-2_KD-G725_010A_1.indd 2 13/12/05 11:41:03 AM 13/12/05 11:41:03 AM