JVC InteriArt LT-20E50SU Instructions Manual Download Page 5

Page: 5 / 63

ENGLISH

- 4 -

WARNING

Fingers may be trapped under the TV causing injuries.

Hold the TV at the bottom in the middle, and do not allow

it to tilt up or down.

 The TV may fall causing injuries. Hold the bottom of the

stand with your hand and tilt the TV up and down.

 Do not allow children to hang from the TV, place their

elbows on the TV or lean against the TV. Doing so may

cause the TV to fall over and lead to injuries.

CAUTION:

To avoid electric shock or damage to the unit, first firmly

insert the small end of the power cord into the AC Adapter

unit it is no longer wobbly, and then plug the larger end

of power cord into an AC outlet.

CAUTION:

The TV screen may be damaged if the TV is carried as

shown in the diagram below.

The TV should always be carried by two people

WARNING :

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

01-ENG-2008-17MB08P-1860UK-(LT-20E50SJ)-50060725.p65

13.12.2004, 15:44

All manuals and user guides at all-guides.com

Summary of Contents for InteriArt LT-20E50SU
































































Search results

Summary of Contents for InteriArt LT-20E50SU

Reviews:

Related manuals for InteriArt LT-20E50SU

Brands by name

Popular brands

JVC InteriArt LT-20E50SU, Instructions Manual

Search results

Summary of Contents for InteriArt LT-20E50SU

Reviews:

Related manuals for InteriArt LT-20E50SU

Brands by name

Popular brands