JVC InteriArt LT-20E50SU Instructions Manual Download

Page: 46 / 63

ENGLISH

- 13 -

Programme Selection (Previous or next

programme)

Press

button to select the previous

programme.

Press

button to select the next

programme.

Programme Selection (direct access)

Press digit buttons on the remote control hand-

set to select programmes between 0 and 9.

TV will switch to the selected programme. To

select programmes between 10 - 99, press

the digit buttons consecutively which

programme you want to select (eg. for

programme 27, first press 2 and then 7). When

it is late to press second digit button only the

first digit programme will be displayed. The

limit of the delay time is 3 seconds
.Example: PR6   press 6, PR12   press
1and 2 , PR123  press 1,2 and 3.
Press  directly  the  programme  number  to

reselect single digit programmes.

Hint:

The channel list numbers are assigned by the broad-

casters. Because not all channels are broadcast free-to-air

and stored by the receiver, the channel list numbers do not

run continuously. The fifteenth channel in the list, for ex-

ample, may not be channel number 15 but channel number
17.

Menu System

Your TV has been designed with a menu sys-

tem to provide an easy manipulation of a multi-

function system. The TV is controlled by choos-

ing the commands, which are displayed on

the screen.

MAIN MENU

Press the

button. The main menu will

be displayed in the middle of the screen.

To select a sub-menu use or but-
ton, and press or button or directly

press

button.

In EXT-1, EXT-2 and EXT-4 modes, main menu

appears the same as in TV mode but without

Program sub-menu.
In EXT-3 mode, Main Menu appears as fol-

lows:

Menu does not disappear automatically if it is

left on the screen.
Press

button again to remove menu.

Picture Menu

Press

button, now you are in main

menu. In the Main menu, select

Picture

using or button, then enter the Pic-
ture menu pressing / or

but-

ton.

Setting Mode

As you enter the picture menu, Mode will be

the first item.

01-ENG-2008-17MB08P-1860UK-(LT-20E50SU)-50058427.p65

06.12.2004, 16:36

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for InteriArt LT-20E50SU
































































Search results

Summary of Contents for InteriArt LT-20E50SU

Reviews:

Related manuals for InteriArt LT-20E50SU

Brands by name

Popular brands

JVC InteriArt LT-20E50SU, Instructions Manual

Search results

Summary of Contents for InteriArt LT-20E50SU

Reviews:

Related manuals for InteriArt LT-20E50SU

Brands by name

Popular brands