- 14 -
Programme Selection (Previous or next
programme)
Press
button to select the previous
programme.
Press
button to select the next
programme.
Programme Selection (direct access):
Press digit buttons on the remote control hand-
set to select programmes between 0 and 9.
TV will switch to the selected programme. To
select programmes between 10 - 99, press
the digit buttons consecutively which
programme you want to select (eg. for
programme 27, first press 2 and then 7). When
it is late to press second digit button only the
first digit programme will be displayed. The
limit of the delay time is 3 seconds
.Example: PR6 press 6, PR12 press
1and 2 , PR123 press 1,2 and 3.
Press directly the programme number to
reselect single digit programmes.
Hint:
The channel list numbers are assigned by the broad-
casters. Because not all channels are broadcast free-to-air
and stored by the receiver, the channel list numbers do not
run continuously. The fifteenth channel in the list, for ex-
ample, may not be channel number 15 but channel number
17.
Menu System
Your TV has been designed with a menu sys-
tem to provide an easy manipulation of a multi-
function system. The TV is controlled by choos-
ing the commands, which are displayed on
the screen.
MAIN MENU
Press the "
MENU
" button. The main menu will
be displayed in the middle of the screen.
To select a sub-menu use or but-
ton, and press or button or directly
press
OK
button.
In EXT-1, EXT-2 and EXT-4 modes, main menu
appears the same as in TV mode but without
Program sub-menu.
In EXT-3 mode, Main Menu appears as fol-
lows:
Menu does not disappear automatically if it is
left on the screen.
Press
MENU
button again to remove menu.
Picture Menu
Press "
MENU
" button, now you are in main
menu. In the Main menu, select
Picture
using or button, then enter the Pic-
ture menu pressing / or
OK
but-
ton.
Setting Mode
As you enter the picture menu, Mode will be
the first item.
JVC LT-17C50BJ-50058073.p65
19.10.2004, 08:40
14
