JVC InteriArt HV-28P37SUE Instructions Manual Download Page 58

Page: 58 / 99

Setting up your TV

HV-36P38SJE/32/28P37SJE / LCT1536-001A-U / ENGLISH

Connecting and placing the

woofer unit (HV-36P38SJE

only)

Connect the supplied woofer connector to the
woofer terminal on the back of the TV.
If the woofer unit is not connected, you will

not be able to enjoy the bass sound.

• Connect so that the lever is raised.

• When disconnecting the woofer

connector, do so while pushing the lever.

Placing the woofer unit

As shown in the diagram, fix the

supplied stoppers to the four corners

of the side of the woofer unit that will

be used as the base.

The woofer unit can be used either standing

up or lying down.
There is no difference between the top and
bottom of the woofer unit irrespective of

whether it is being used standing up or lying
down.

Place the woofer unit within the range

of the connection cable.

It is recommended that the woofer unit be

placed with the speaker facing forwards.

Pay attention to the following in order

to prevent unnatural colours from

appearing in the corner of the screen.

• Place the woofer unit at least 20 cm away

from either side of the TV.

• Do not place the woofer unit on top of the

TV.

• When the TV is used on a TV stand or

table, do not place the woofer unit
underneath the TV.

EXT-

AUDIO O

Lever

HV-36P38SJE_Eng.book Page 7 Friday, September 26, 2003 10:44 AM

Summary of Contents for InteriArt HV-28P37SUE




































































































Search results

Summary of Contents for InteriArt HV-28P37SUE

Reviews:

Related manuals for InteriArt HV-28P37SUE

Brands by name

Popular brands

JVC InteriArt HV-28P37SUE, Instructions Manual

Search results

Summary of Contents for InteriArt HV-28P37SUE

Reviews:

Related manuals for InteriArt HV-28P37SUE

Brands by name

Popular brands