SET UP menu
37
ENGLISH
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English
4 Press the
5
5
5
5
buttons to choose
ON
An unscrambled picture appears.
To cancel the DECODER (EXT-2)
function:
Press the
5
buttons to choose OFF.
5 Press the
a
a
a
a
button to complete
the setting
The T-V LINK menu appears.
You can send the programme numbers
data to a VCR with the T-V LINK
function.
6 Turn on the VCR, and then press
the
a
a
a
a
button to transmit the data
to VCR
The T-V LINKmenu disappears once the
data transmission ends.
7 If you have another TV channel
capable of being unscrambled with
a Decoder, repeat steps 2 through 6
If for some reason the DECODER (EXT-
2) function has been set to “ON” but the
TV channel cannot be unscrambled, check
the following:
• Has the Decoder been connected to the
VCR properly according to the VCR
and Decoder Instruction Manuals?
• Has the Decoder power been turned
on?
• Can the TV channel be unscrambled
with a Decoder?
• Is it necessary to change the VCR
settings in order to connect the
Decoder? Confirm that the VCR is set
properly by rechecking the VCR
Instruction Manual.
EXT SETTING
1 Choose EXT SETTING, then press
the
a
a
a
a
or
3
3
3
3
button
The EXT SETTING menu appears.
2 Follow the operation description of
a function you want to use and
operate the function
S-IN:
You can enjoy high-quality picture of the
2 S-VIDEO signal (Y/C signal).
ID LIST:
You can have a name corresponding to
the devices connected for each EXT
terminal.
DUBBING:
You can choose a signal source to be
output from an EXT-2 terminal.
S-IN (S-VIDEO input)
When connecting a device (such as S-VHS
VCR) which enables an S-VIDEO signal (Y/
C signal) to be output, you can enjoy high-
quality picture of the S-VIDEO signal (Y/C
signal).
D0005-EN
DOWNLOAD TV
VCR
T-V LINK
OK
EXIT
D0020-EN
S-IN
ID LIST
OK
EXT-1
EXT-3
DUBBING
EXT-2
EXT-4
EXT-5
TV
> EXT SETTING
HV-36P38SUE_Eng.book Page 37 Friday, September 26, 2003 11:10 AM
