1-16
HX-Z3
While turning the cams R1 and R2 assembly in the
arrow direction h ,align the shaft i of the CD
loading mechanism assembly to the position shown
in Fig.10.
Remove the four screws F retaining the CD loading
mechanism assembly.
For dismounting only the CD traverse mechanism
without removing the CD loading mechanism
assembly, align the shaft j of the CD loading
mechanism assembly to the position shown Fig.11
while turning the cam R1 and R2 assembly in the
arrow direction k .
By raising the CD loading mechanism assembly in
the arrow direction l , remove the assembly from the
lifter unit
1.
2.
Removing the CD loading mechanism
assembly(See Fig.10)
Removing the CD traverse mechanism
(See Fig.11 and 12 )
Move the cam gear in the arrow direction m . Then,
the CD pickup unit will be moved in the arrow
direction n .
According to the above step, shift the CD pickup unit
to the center position.
While pressing the stopper retaining the shaft in the
arrow direction o , pull out the shaft in the arrow
direction p .
After dismounting the shaft from the CD pickup unit,
remove the CD pickup unit
1.
2.
3.
4.
Removing the CD pick unit
(See Fig.13 )
1.
2.
Cams R1, R2 assembly
i
CD loading mechanism assembly
h
F
F
F
F
Arrow
Lifter unit
CD traverse mechanism
l
Arrow
Cam R1, R2 assembly
k
Arrow
j
CD Pickup unit
CD loading
mechanism
Cam gear
Shaft
Stopper
Stopper
o
p
n
m
Shaft
Shaft
Fig.10
Fig.12
Fig.11
Fig.13
