Masterpage:Right-No-Heading
EN
27
Filename [XVS30EX_07S-VHS.fm]
Page 27
September 1, 2003 12:30 pm
To Timer-Record Weekly Or Daily Serials:
— anytime during steps
WEEKLY
(
number
key “9”
) for weekly serials or
DAILY
(
number key “8”
) for daily
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears
on the TV screen. Pressing the button again makes the
corresponding indication disappear.
NOTES:
●
You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a
ninth, “PROGRAM FULL” appears on the TV screen and
“FULL” appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes. (
“To cancel or change a programme”)
●
If there is a conflict in the timer schedule and one programme
overlaps with another, the programme starting earlier or
programme with the lower programme number will be
recorded.
Check, cancel and change programmes
A
Disengage the timer mode.
Press
#
, then press
1
.
B
Access the Programme Check screen.
C
Access the Programme screen.
To cancel or change a programme
D
Cancel or change a programme.
Press
&
to cancel a programme. To change programme
settings, press the appropriate button:
START +/–
,
STOP +/–
,
DATE +/–
,
PR +/–
,
VPS/PDC
(
number key
“7”
),
DAILY
(
number key “8”
),
WEEKLY
(
number key
“9”
) and/or
p
.
E
Return to the normal screen.
Press
"
as many times as necessary. If there are still
some programmes remaining, go on to step
F
Return to the timer mode.
Press
#
.
NOTE:
You can also check the programmes on the front display panel
even if the unit’s power is off (unless the unit is in the Power Save
mode
pg. 65) or the unit is in the Timer mode; however, it is
not possible to cancel or change the programmes.
Satellite Receiver Users
To timer-record a satellite broadcast using Express Timer
Programming:
A
Set “L-2 SELECT” to “A/V”. (
B
–
. Enter “L-2” for the channel position
in step
C
Set the satellite receiver to the appropriate channel before
the selected programme begins.
D
Leave the satellite receiver’s power on.
Press
"
.
Press
"
again to check
more information. Each time
you press
"
, the next
programme’s information
appears.
XVS30EX_01.book Page 27 Monday, September 1, 2003 12:31 PM
