JVC HR-XVC29UJ, Instructions Manual

Page: 69 / 88

Masterpage:Right
EN
69
Filename [XVC29U_09Editing.fm]
Page 69 14 June 2004 3:54 pm
EDITING (DVD DECK)
Digital Audio
Dubbing
You can dub selected audio from the DVD or Audio CD disc to
a MD etc.
However, it is not possible to dub the copy-protected disc.
Example: Dubbing to a MD
A
Make connections.
Connect the coaxial cable between the unit and the
digital audio device.
B
Place a disc and load a MD.
For the DVD deck
A
Press OPEN/CLOSE (
x
) on the DVD deck to open the
disc tray.
B
Place the disc in the disc tray.
C
Press OPEN/CLOSE (
x
) on the DVD deck to close the
disc tray.
For the digital audio device
Insert a MD.
C
Prepare the DVD deck for dubbing.
A
Press DVD and select the audio to be dubbed.
B
Search for the point where you want to start dubbing
by pressing
PLAY (
4
), FF (
5
) or REW (
3
) then
press STOP (
8
).
C
Press REW (
3
) a little, then press PLAY (
4
) to start
playback.
D
Press PAUSE (
9
) to pause playback a little before the
start point.
D
Prepare the audio device for dubbing.
Select the input mode.
E
Start dubbing.
A Press PLAY (
4
) to start playback on the DVD deck.
B Start recording on the audio device.
F
End dubbing.
Stop recording on the audio device. Then press STOP (
8
)
to stop playback on the DVD deck.
NOTES:
●
There may be a discrepancy of several seconds between
where you intend editing to start, and where it actually starts.
●
You can also dub a Video CD or SVCD. Set “DIGITAL AUDIO
OUTPUT” to “PCM ONLY”. (
墌
pg. 76)
●
Turn on the TV and select the VCR channel (or AV
mode).
●
Slide the TV/VCR/DVD switch to the right.
Rear of unit
Digital audio device
(MD deck etc.)
Coaxial cable
(not supplied)
DIGITAL AUDIO OUT
Player
Recorder
XVC29U_09Editing.fm Page 69 Monday, June 14, 2004 3:55 PM