JVC HR-XVC29UJ, Instructions Manual

Page: 66 / 88

Filename [XVC29U_09Editing.fm]
Masterpage:Left0
66
EN
Page 66 14 June 2004 3:54 pm
EDITING (VCR DECK)
Edit From A
Camcorder
You can use a camcorder as the source player and your
unit as the recording deck.
A
Make connections.
Connect the camcorder’s AUDIO OUT and VIDEO OUT
connectors to the unit’s front panel AUDIO and VIDEO
input connectors.
●
When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your unit.
●
When a Master Edit Control - equipped JVC camcorder is used, the
camcorder is capable of controlling the unit. Refer to the camcorder’s
instruction manual for operating procedure.
B
Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C
Set the unit’s input mode.
Press AUX ( number key “0” ) and/or CH to select “F-1”.
D
Set the edit mode.
See “PICTURE CONTROL” on page 73.
E
Engage the Record Pause mode.
Use PLAY (
4
), REW (
3
), or FF (
5
) to locate the
point where you start recording, then press and hold
PAUSE (
9
) and press REC (
7
) to engage the Record
Pause mode.
F
Start the camcorder.
Engage the Play mode of the camcorder.
G
Start the unit.
Press PLAY (
4
) to engage the Record mode of the unit.
NOTES:
●
All necessary cables can be obtained from your dealer.
●
When you select “EDIT” to dub tapes in step
D
, be sure to select
“NORM” after you finish dubbing the tapes.
Recorder
To Audio/VIDEO
Output
connectors
Camcorder
AUDIO input
Player
VIDEO
input
Audio/video cable
(not supplied)
To REMOTE
PAUSE
connector
Mini-plug cable
(not provided)
(JVC camcorder
only)
To Edit
Slide the TV/VCR/DVD switch to the right.
XVC29U_09Editing.fm Page 66 Monday, June 14, 2004 3:55 PM