Filename [XVC29U_07S-VHS.fm]
Masterpage:Left+
38
EN
Page 38
14 June 2004 3:52 pm
OPERATIONS ON VCR DECK (cont.)
When programs overlap each other
If “PROGRAM NOT COMPLETED PROGRAM OVERLAP”
appears, you have another program overlapping the program
you have just made.
The Program Check screen appears and conflicting programs
will start blinking.
Example: Program 1 (you have just made) and Program
4 overlap each other.
A
Confirm the overlapping programs.
Overlapping programs blink on the TV screen.
B
Select the program to modify.
Press
rt
, then press
ENTER
or
e
.
●
You can only select one of the overlapping programs.
NOTE:
If you do not mind this overlap, press
PROG.
to finish the timer
program setting. The program with the lower program number
will be recorded and the other one will not be recorded
correctly. If no changes are made for approximately 1 minute,
the unit will return to the normal screen.
C
Cancel or change program setting.
To cancel a program,
press
CANCEL
when the Program
screen you do not want is shown. “PROGRAM
COMPLETED” appears on the TV screen for about
5 seconds, then the normal screen appears.
To change a program,
press the appropriate button:
START +/–
,
STOP +/–
,
DATE +/–
,
CH +/–
,
DAILY
(
number key “8”
),
WEEKLY
(
number key “9”
) and/or
SP
/
EP
when the Program screen on which you want to make
changes is shown, then press
ENTER
. “PROGRAM
COMPLETED” appears on the TV screen for about
5 seconds, then the normal screen appears.
NOTE:
If the overlap is not yet solved, or another overlap occurs with
the timer program setting after making the last correction on a
program, the conflicting programs will be shown on the Program
Check screen again. Repeat the above steps again until the
overlap is solved.
ATTENTION
If there is a conflict in the timer schedule and one
program overlaps with another, only the parts shown
below in gray will be recorded.
Pattern 1:
The program with the lower program number
will be recorded.
Pattern 2:
The program starting earlier will be recorded.
Pattern 3:
The program starting earlier will be recorded,
followed by the remaining portion of the other
program.
Program 1
Program 2
CH10
CH40
Not recorded
Not recorded
Program 1
Program 2
CH10
CH40
Not recorded
Program 1
Program 2
CH10
CH40
XVC29U_07S-VHS.fm Page 38 Monday, June 14, 2004 3:53 PM
