JVC HR-XVC29SUC, Instructions Manual

Page: 34 / 76

Filename [XVC2829US_07S-VHS.fm]
Masterpage:Left+
34
EN
Page 34 8 December 2004 9:56 am
OPERATIONS ON VCR DECK (cont.)
Express Timer
Programing
Example: To timer-record the program from 8:00 PM to
10:00 PM on 24th December, on channel 12.
A
Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VHS indicator
lights up on the front display panel.
On the Remote
Press VCR so that the VHS indicator lights up on the front
display panel.
B
Access the Program screen.
C
Enter the program start time.
D
Enter the program stop time.
Press STOP +/– to enter the time you want recording to
stop.
●
Press and hold STOP +/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
E
Enter the program date.
Press DATE +/– .
●
The current date appears on the TV screen. The date you enter
appears in its place.
Before performing Express Timer Programing:
●
Make sure that the unit’s built-in clock is set properly.
●
Insert a cassette with the safety tab in place. The unit will
come on automatically.
●
Turn on the TV and select the VCR channel (or AV mode).
●
Slide the TV/VCR/DVD switch on the Remote to the right.
VCR
SP/EP
PROG
CH +/–
TIMER
START +/–
STOP +/–
DATE +/–
DAILY
WEEKLY
ENTER
Slide to the
right.
Press PROG . (If you’re just
starting out, “PROGRAM 1”
appears.)
Press START +/– to enter the
time you want recording to
start.
●
Press and hold START +/– to
move in 30-minute
increments, or press and
release repeatedly to move
1 minute at a time.
XVC2829US_01.book Page 34 Wednesday, December 8, 2004 10:48 AM