manualshive.com logo in svg

JVC HR-XV45SEF, Service Manual, Page: 96 / 169

Share
Download
JVC HR-XV45SEF Service Manual Download Page 96

20

OTHERS

The PBC, Auto Play and DivX(R) VOD settings can be
changed.

PBC

Set Playback Control (PBC) to On or Off.

On

: Video CDs with PBC are played according to the

PBC.

Off

: Video CDs with PBC are played the same way as

Audio CDs.

Auto Play 

You can set up the DVD Player so a DVD disc auto-
matically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.

On:

Auto Play function is active.

Off:

Auto Play function is not active.

Notes:

The Auto Play function may not work for some DVDs.

DivX(R) VOD 

You can display the DivX DRM (Digital Rights
Management) Registration code for your unit only.

The Registration code is used for VOD (Video-On-
Demand) service agent. You can purchase or rent an
encrypt move file.

Notes:

If you rent the DivX VOD file, it has several options of
viewing limits as shown below.

•

Display the number which you can watch the file.

•

The rental has been expired.

•

Display the authorization error.

DivX

DVD

VCD

PBC

Off

Move

Auto Play

OTHERS

On

Select         

Select

DivX(R) VOD

DivX(R) Video On Demand

Your registration code is : XXXXXXXX

      To learn more visit

      www.divx.com/vod

(Done)

View DivX(R) VOD Rental

        This rental has 3 views left.

      Do you want to use one

      of your 3 views now?

(Yes) (No)

Rental Expired

       (Done)

Authorization Error

This player is not authorized 
          to play this video.

(Done)

Summary of Contents for HR-XV45SEF










































































































































































Reviews:

No comments