JVC HR-XV28SEF, Service Manual

Page: 34 / 131

1-34 (No.YD068)
MAIN BASE
TRAY DISC
BASE MAIN
LEVER
BASE MAIN
BOTTOM SIDE VIEW
PLATE CLAMP
MAGNET CLAMP
CLAMP UPPER
HOLDER
BASE MAIN
Fig. 5-2 Fig. 5-1
(Fig. A)
DISC CLAMP ASSEMBLY
1.Main Base (Fig. 5-1)
1-1. Clamp Assembly Disc
1) Place the Clamp Assembly Disc as Fig. (A)
2) Lift up the Clamp Assembly Disc in direction of
arrow(A).
3) Separate the Clamp Assembly Disc from the Holder
Clamp.
2. Tray Disc (Fig. 5-2)
1) Insert and push a Driver in the emergency eject
hole(A) at the right side, or put the Driver on the
Lever(B) of the Gear Emergency and pull the Lever(B)
in direction of arrow so that the Tray Disc is ejected
about
15~20mm.
2) Pull the Tray Disc until it is separated from the Base
Main
completely.
1-1-1. Plate Clamp
1-1-2. Magnet Clamp
1-1-3.Clamp Upper
1) Turn the Plate Clamp to counterclockwise direction
and then lift up the Plate Clamp.