JVC HR-VP450U, Instructions Manual

Page: 14 / 56

14
EN
Tuner
Set Receivable Channels
TURN ON THE VCR
1
Press POWER .
ACCESS MAIN MENU
SCREEN
2
Press MENU .
ACCESS TUNER SET
SCREEN
3
Move the highlight bar
(arrow) to "TUNER SET" by
pressing
CH
5∞
or
SHUTTLE PLUS
%fi
, then
press OK or SHUTTLE
PLUS .
PERFORM AUTO CHANNEL
SET
4
Move the highlight bar
(arrow) to "AUTO
CHANNEL SET" by
pressing
CH
5∞
or
SHUTTLE PLUS
%fi
, then
press OK or SHUTTLE
PLUS .
●
Receivable channels in
your area are
automatically assigned to
the
CH
5∞
( +/– ) buttons,
and non-receivable
channels are skipped.
NOTES:
●
At the end of Auto
Channel Set, “SCAN
COMPLETED” appears on screen.
●
If the scan was unsuccessful, “SCAN COMPLETED–
NO SIGNAL” appears on screen. Check the
connections and start again.
RETURN TO NORMAL
SCREEN
5
Press MENU .
INITIAL SETTINGS (cont.)
%
%
INFORMATION
The VCR detects the band (TV or CATV) and selects the
correct band automatically during Auto Channel Set.
The selected band will be displayed on the right side of
"BAND" on the Tuner Set screen.
1 2 3
4 5 6
7 8 9
0
2
4
1
3
MENU
OK
SHUTTLE PLUS
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
POWER
CH+/–
MAIN MENU
FUNCTION SET
=
TUNER SET
INITIAL SET
PRESS (
5
,
∞
), THEN (OK)
PRESS (MENU) TO END
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END
TUNER SET
BAND CATV
=
AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH (
5
,
∞
) AND (OK)
PRESS (MENU) TO END
OK
CH
MENU
POWER