JVC HR-VP450U, Instructions Manual

Page: 12 / 56

12
EN
INITIAL SETTINGS (cont.)
Semi-Auto
You can change the Host Channel/D.S.T. /Time Zone setting
manually.
SET AUTO CLOCK TO ON
5
At the Clock Set screen,
press
OK or SHUTTLE
PLUS to move the
highlight bar to "AUTO
CLOCK" and press
CH
5∞
or SHUTTLE PLUS
%fi
to
set to "ON".
a – To select the Host
Channel — go to step 6
b – To select the D.S.T. mode — go to step 7
c – To select the Time Zone — go to step 8
NOTE:
The time that has been set previously will be erased
when "AUTO CLOCK", "HOST CH", "D.S.T." or "TIME
ZONE" setting is changed.
SELECT HOST CHANNEL
6
You can either select "AUTO" or enter a PBS channel
number. Move the highlight bar to "HOST CH" by
pressing
OK or SHUTTLE PLUS , then press CH
5∞
or SHUTTLE PLUS
%fi
to set to "AUTO" or the desired
PBS channel number.
NOTE:
There are some PBS channels that do not transmit clock
setting data.
SELECT D.S.T. MODE
7
You have three choices:
a – Select "AUTO" and the adjustment to your VCR's
clock will be made according to the incoming signal
from the host channel.
b – Select "ON" and the adjustment will be made based
on the clock itself.
c – Select "OFF" if Daylight Saving Time does not apply
to you.
Move the highlight bar to "D.S.T." by pressing OK or
SHUTTLE PLUS , then press CH
5∞
or SHUTTLE
PLUS
%fi
to select the desired mode.
%
1 2 3
4 5 6
7 8 9
0
2
4
1
3
POWER
MENU
OK
SHUTTLE PLUS
**AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the VCR’s
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
%
%
CLOCK SET
TIME DATE YEAR
1:00PM 12/24 98 THU
AUTO CLOCK : ON
HOST CH : AUTO (CATV)
D.S.T. : AUTO
TIME ZONE : AUTO
PRESS (
5
,
∞
), THEN (OK)
PRESS (MENU) TO END
MENU
CH
OK