EN
19
Names of
special-effects
playback
Reverse
Forward
Search
Play
Slow-Motion
*Still
Slow-Motion
Play
Search
(Time Jog**)
(Time Jog**)
-9x
-7x -5x -3x
-1x
-1/2x
0
1/2x
1x
1.5x 2x 3x 5x 7x 9x
-7x
-3x
-1/2x
0
1/2x
1x
1.5x 2x
5x
9x
Audio is output.
Audio is not
Audio is
Audio is
Audio is output.
output.
output.
output.
TimeScan
Speed LP
Speed SP
Audio output
●
The recorder's TIME JOG & SCAN indicator lights during TimeScan.
●
The speed is shown during TimeScan in the upper right corner of the TV screen for approx. 5 seconds. (The display may be
distorted.)
●
To resume normal playback, press
PLAY
.
●
When using the recorder's
TIME SCAN SHUTTLE
ring, the playback speed may not change in the correct step if it is turned
too fast.
●
Picture and audio may become distorted when the recording speed changes. When this happens, resume normal playback
once, and then try using TimeScan again.
●
The picture may be noisy or there may be a loss of colour when you change the playback speed. (More noise will appear with
LP recordings.)
●
Noise may appear or the upper part of the picture may be distorted during still, frame-by-frame playback, 2x search of LP
recordings, or depending on the tape being used.
●
Picture may appear distorted in comparison to normal playback.
●
When normal playback resumes from search (including TimeScan), still, slow motion or frame-by-frame playback, the picture
may jitter vertically momentarily depending on the type of TV being used.
●
In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.
●
TimeScan sound quality will differ in comparison to normal playback.
●
When material such as music videos where there is non-stop sound (very few breaks in the soundtrack) are viewed at 1.5x or
2x normal speed, the audio playback may be faster than normal.
●
Depending on the type of tape contents, the sound may not be clear during forward slow-motion playback.
●
Time Jog cannot be activated by pressing
PAUSE
for longer than 2 seconds.
●
When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.
●
Picture will be monochrome with an LP-recorded MESECAM tape during TimeScan.
●
When playing back an NTSC tape, the speeds differ from those listed above and are not shown on the TV screen, and the
TIME JOG & SCAN indicator does not light.
Also, depending on the type of tape being used, the picture may be distorted and there may be a loss of colour even when in
the TimeScan mode.
●
TimeScan at -1/2x, 1/2x and 1.5x normal speed are not possible with a MESECAM tape.
If you don't want to hear TimeScan audio, set "TIME SCAN AUDIO" to "OFF" (See below).
TimeScan Audio
The audio output can be set ON/OFF during TimeScan. Select ON/OFF as required.
* The default setting is "ON".
1
Press
MENU
to access the Main Menu screen.
2
Move the highlight bar (pointer) to "MODE SET" by pressing
%fi
, then press
OK
or .
3
Move the highlight bar (pointer) to "TIME SCAN AUDIO" by pressing
%fi
, then press
OK
or to select "ON" or "OFF".
4
Press
MENU
to return to the normal screen.
%
%
*
* Still mode cannot be engaged using the remote control's or button. Still mode can be engaged by
pressing the
PAUSE
button. In the Still mode, the TIME JOG & SCAN indicator does not light even though
you can hear TimeScan audio.
** Smooth slow motion delivering an uninterrupted moving image without distortion.
MODE SET
AUTO TIMER
OFF
O. S. D.
ON
B. E.
S. T.
ON
AUTO SP
=
LP TIMER
OFF
DIGITAL 3R
ON
POWER SAVE
OFF
S-VHS
AUTO
NEXT PAGE
[
5∞
]
=
[MENU] : EXIT
PREVIOUS PAGE
EDIT
OFF
AV2 SELECT
VIDEO
COLOUR SYSTEM PAL/NTSC
TIME SCAN AUDIO
ON
[
5∞
]
=
[MENU] : EXIT
HR-S8500E
HR-S8500EH
MODE SET
AUTO TIMER
OFF
O. S. D.
ON
B. E.
S. T.
ON
AUTO SP
=
LP TIMER
OFF
DIGITAL 3R
ON
S-VHS
AUTO
EDIT
OFF
NEXT PAGE
[
5∞
]
=
[MENU] : EXIT
PREVIOUS PAGE
AV2 SELECT
VIDEO
COLOUR SYSTEM PAL/NTSC
TIME SCAN AUDIO
ON
[
5∞
]
=
[MENU] : EXIT
%
fi
Summary of Contents for HR-S8500E
Page 67: ...EN 67 MEMO ...
