JVC HR-S5975EK Instructions Manual Download Page 34

Page: 34 / 60

advanced features

Finding Specific Scenes

Skip Search

During playback, press

up to 4 times. Each press of the

button will cause

the VCR to go into fast-motion playback for a period of 30 seconds. Normal playback resumes
automatically.

• To return to normal playback during a Skip Search, press

Index Search

Each time you record a programme, this VCR puts an index marker at the point that you started
recording. The VCR can fast wind to any one of nine index markers in either direction from the
point that you stop the tape.

NOTE:

Before starting, make sure the VCR is in the Stop mode.

finding first index marker

Press

[

]

once. The TV screen will display

[

]

and the

VCR begins searching through the tape in the corresponding direction for the first index marker
from its current position.

finding subsequent index marker s

Press

[

]

the required number of times (e.g. five).

The TV screen will display

[

]

and the VCR begins searching through the tape in the

corresponding direction for the fifth index marker from its current position.

Instant Review

The display panel tells you how many timer-recorded
programmes are on the tape. If you have three, the REVIEW

REVIEW

indicator and ‘3’ blink on the display panel. To watch the first of
these three programmes, press REVIEW

REVIEW

three times

. You can

move back up to nine programmes from your current position. Pressing the REVIEW

REVIEW

REVIEW button

causes the VCR to turn on, rewind to the beginning of the the last timer-recorded programme and
begin playback.

If you press the REVIEW

REVIEW

REVIEW button one time, the front display panel will display “-1” and start

rewinding. The number will be changed whenever you press REVIEW

REVIEW

REVIEW up to “-9”.

timer mode

Instant Review will not work while the VCR is in Timer mode.

HR-S5975/5977EK-EN/p27-40

3/6/04, 11:20 AM

Summary of Contents for HR-S5975EK





























































Search results

Summary of Contents for HR-S5975EK

Reviews:

Related manuals for HR-S5975EK

Brands by name

Popular brands

JVC HR-S5975EK, Instructions Manual

Search results

Summary of Contents for HR-S5975EK

Reviews:

Related manuals for HR-S5975EK

Brands by name

Popular brands