January 31, 2002 10:09 am
Page 15
— 15 —
Master Page: Right
Connecting to a satellite receiver
Connect the decoder to the satellite receiver’s connector if you
have a decoder, EURO AV1 AUDIO/VIDEO connector to TV’s
connector, and EURO AV2 DECODER connector to the satellite
receiver’s connector. Then connect the satellite receiver and TV.
●
To record a programme via the satellite receiver, set the input
mode to “AV2” by pressing
AV
and/or
PR+/–
.
●
To receive a scrambled broadcast, descramble the signal with
the decoder.
●
For details, refer to the instruction manual for the satellite
receiver and decoder.
Connecting/Using a decoder
You can enjoy the variety of programming that is available through
scrambled channels.
A
Set “DECODER” to “ON”. (
墌
5)
B
Connect the recorder’s EURO AV2 DECODER connector to the
decoder’s 21-pin SCART connector using a 21-pin SCART cable.
Connecting/Using a stereo system
(HR-J590/J593/J599EU only)
You can listen to the soundtrack through your stereo system.
Connect the AUDIO OUT L and R connectors on the recorder to
the AUX IN or TAPE MONITOR connectors on your stereo
system’s receiver or amplifier.
●
When listening to sound through the connected stereo system,
turn the TV’s volume down completely.
Child Lock
You can disable the recorder’s operations. While the recorder is
turned on, press . “SAFE” appears on the screen.
To release the child lock, press
on the remote control until the
power indicator blinks on the display panel.
●
If any buttons on the recorder are pressed, “SAFE” appears on
the screen and the power indicator blinks on the display panel.
NOTES:
●
When the child lock function is in use, keep the remote control
out of the children’s reach.
●
Timer recording programs will be performed even if the child
lock function activated.
System Connections
Subsidiary Settings
HR-J590_593_290_293EU-001EN.fm Page 15 Thursday, January 31, 2002 10:12 AM
