JVC HM-DH5U Instructions Manual Download

Page: 85 / 92

* For details of a digital tuner, refer to the instruction manual of the digital tuner.

CODE MESSAGE

DESCRIPTION

300

“CAN NOT DECODE VIDEO OR AUDIO
USE SET TOP BOX OR HDTV TUNER”

• A signal format that is not supported by this VCR was

input.

• Use a digital tuner*, etc.

301

“TOO MANY i.LINK INSTRUMENTS READ
INST.BOOK”

• A signal containing too much data was input to the

i.LINK connector on this VCR.

• There are too many devices with i.LINK connectors,

such as VCRs and digital video cameras, connected to
the i.LINK connector on this VCR. Turn off any devices
that are not in use.

302

“COPY RESTRICTED PROG OUTPUT 480i
VIDEO”

• When playing back a program that was copy protected

in 1080i, 720p, or 480p mode, the VCR down-converts
to 480i mode for output.

303

“VIDEO SIGNAL IS NOT FOUND FOR
THIS PROGRAM”

• An attempt was made to play back a tape that does not

contain video signal.

304

“THIS PROGRAM CAN NOT PLAY BACK
THE CONTENT IS NOT ACCEPTABLE”

• An attempt was made to play back a tape that contains

copy information that is not compatible with this VCR.

305

“OUTPUT PROHIBITED DUE TO TV
WITHOUT HDCP COPY PROTECTION”

• An error has occurred due to an attempt to output

through the HDMI output connector to the TV that is
not HDCP-compliance.

Summary of Contents for HM-DH5U





























































































Search results

Summary of Contents for HM-DH5U

Reviews:

Related manuals for HM-DH5U

Brands by name

Popular brands

JVC HM-DH5U, Instructions Manual

Search results

Summary of Contents for HM-DH5U

Reviews:

Related manuals for HM-DH5U

Brands by name

Popular brands