manualshive.com logo in svg

JVC HD-ILA HD-52G786, User Manual

Share
Download
JVC HD-ILA HD-52G786 User Manual Download Page 94

94

Appendix

WARNING!

Remember it is very important that YOU DO NOT TOUCH THE LAMP SURFACE. Please 
read the warnings on page 91 again. 

Also, replace the lamp with part number TS-CL110U only! The television is designed 
to work specifically with this lamp. Lamps other than TS-CL110U may cause 
malfunctions and/or other damage to the television.

To purchase a replacement lamp kit, please call 1-800-252-5722. 

NOTICE (for USA)

This product has a High Intensity Discharge (HID) lamp that 
contains a small amount of mercury.  It also contains lead in some 
components.  Disposal of these materials may be regulated in your 
community due to environmental considerations.  For disposal or 
recycling information, please contact your local authorities, or the 
Electronics Industries Alliance:  http://www.eiae.org

5)  Install the new lamp unit.

Holding the handle attached to the new lamp unit, slide and push the new lamp straight into the 
television and back into the lamp housing area. 

Do not forget to re-tighten the two screws. 

Note:

 If the lamp does not sit securely in the TV (flat in the lamp housing area), it won’t turn on. 

Make sure the lamp sits securely and flat in the housing area.

6)  Re-install the lamp cover.

Insert the lamp cover in the right concave and close the lamp cover. Because the lamp cover 
has a role to help prevent the danger of an electrical shock, tighten the screw using your 
fingers.

Note:

•  After installing the new lamp unit, do not forget to reset the lamp timer.  See page 66.

LCT1866-001A-A ENG e   94

5/16/05, 5:02:23 PM

Summary of Contents for HD-ILA HD-52G786









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands