manualshive.com logo in svg

JVC HD-ILA HD-52G786, User Manual

Share
Download
JVC HD-ILA HD-52G786 User Manual Download Page 29

29

Quick Setup                                     Connections

Table of signals for each type of computer

Resolution

640 x 480
(VGA)

1024 x 768
(XGA)

Vertical
Frequency
(Hz)

60.0

60.0

Horizontal
Frequency
(kHz)

31.5

48.4

When a picture is not displayed

With some computers, some problems can be solved by changing the settings.  Check the 
computer's refresh rate and set it to 60Hz.  Computers that cannot set the refresh rate to 60 
Hz, can not be used with this TV.  Refer to the computer's instruction manual.

*

Apple Macintosh is a registered trademark of Apple Computer, Inc.

Note:

•   If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen.  

It appears when the input is PC and it is a single screen.

•  Only the above formats are supported.

•    Even with the above formats at 60 Hz, some problems may be experienced depending on 

the quality of the synchronous signal.  (Depending on the quality, some pictures may not be 
displayed correctly).

•  Apple Macintosh

*

 computers are not supported.

LCT1866-001A-A ENG e   29

5/16/05, 5:01:51 PM

Summary of Contents for HD-ILA HD-52G786









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands