manualshive.com logo in svg

JVC HD-ILA HD-52G786, User Manual

Share
Download
JVC HD-ILA HD-52G786 User Manual Download Page 27

27

Quick Setup                                     Connections

Connecting an i.LINK compatible device to the back of 
your television

i.LINK is a digital serial interface that allows devices equipped with an i.LINK connector to 
exchange digital video signals, digital audio signals and device control signals bi-directionally 
over a single cable. (For example, a JVC D-VHS VCR).

i.LINK refers to the IEEE1394-1995 industry specification and extensions thereof.  The     logo 
is used for products compliant with the i.LINK standard.

This projection television uses a four-pin i.LINK connector to input and output MPEG2 video 
signals, audio signals and control signals.

i.LINK  IN/OUT
   S400(TS)

OPTICAL OUT

Digital Audio

TV Rear Panel

i.LINK Compatible Device

1)   Connect the i.LINK cable from the back of the TV to the back of the i.LINK compatible 

device.

Notes: 

 

•   Use only the S400 i.LINK cable when connection your devices.
•   See page 83 on how to select the i.LINK device.
•   Refer to your owners manual on using your i.LINK device.
•   When recording or playing back video with an i.LINK device, if you perform the Auto Tuner 

Setup, the video signal you are recording or playing back may stop or you may not be able 
to perform the Digital Auto Tuner Setup.

•   Your television can connect with i.LINK D-VHS decks and HD-Camcorders (JVC brand only).  

If you connect other brand devices, with i.LINK cable, they will not work.

•  It can play only the recorded contents in Digital Mode.
•  Use only tapes bearing the DVHS (SVHS) mark for recording.

LCT1866-001A-A ENG e   27

5/16/05, 5:01:50 PM

Summary of Contents for HD-ILA HD-52G786









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands