MENU SCREENS
94
OTHERS[2/2] Menu Screen
* This is not displayed in VTR mode.
Item
Function/Setting (bold characters indicate initial settings)
1394 REC TRIGGER*
Sets how to control the REC trigger command output from the IEEE1394 connector. (Can be displayed and set in
camera mode)
Set this when recording a backup of the HDV/DV signal from this device onto another device.
OFF
: Does not control the backup device.
SYNCRO : Controls the backup device in conjunction with the recording start/stop mode status on this device, and
if there is no videocassette or if no tape remains for recording, controls the backup device in conjunction
with the REC trigger button and the lens VTR button on this device.
SPLIT
: The REC trigger button on the right panel of this device controls the backup device recording start/stop.
Set this when you want to control the timing of the recording on this device and the backup device sep-
arately.
SERIES : Automatically starts recording on a backup device that is on Pause when the tape on this device has less
than 3 minutes remaining during shooting.
MEMO
• If you use the backup recording function on the BR-HD50, set this item to OFF.
• The cursor (
K
) does not move to this item when this device is recording.
BACK SPACE [HDV]*
This function controls the camera tape transport, back space and pre-roll time when the camera is connected to an
external HDD or external back up Recorder via IEEE1394 in HDV mode.
P-1394
: Priority for IEEE1394 recording (Auto setting)
P-TAPE : Priority for camera VCR recording
Note 1:
REC start signal will be sent 3 seconds after pressing REC trigger button.
* Actual recording start time is depending on recorder performance.
Note 2:
REC start signal will be sent just after pressing REC trigger button.
* Actual recording start time is depending on recorder performance.
Note 3:
In this mode, the IEEE1394 stream is discontinuous during internal VCR back space editing (when the REC trigger
is operated). This may result in breaks in the recording on tape on an external recorder. In the case of HDD recording
this may result in this device staying in REC PAUSE or divided files.
MEMO
The cursor (
K
) does not move to this item when this device is recording.
BACK SPACE [HDV]
IEEE1394
connection
1394 REC
TRIGGER
(
X
See page 94)
Internal
VCR
start delay
External Recorder or HDD
vie IEEE1394 terminal
P-1394
Connected and
Power ON
OFF
approx. 3 seconds
N/A
SYNCRO
See Note 1
SPLIT
See Note 2
SERIES
N/A
No connection or
Power OFF
OFF
approx. 1 second
N/A
SYNCRO
SPLIT
SERIES
P-TAPE
Connected and
Power ON
OFF
approx. 1 second
See Note 3
SYNCRO
SPLIT
SERIES
N/A
No connection or
Power OFF
OFF
approx. 1 second
N/A
SYNCRO
SPLIT
SERIES
95
* This is not displayed in VTR mode.
Item
Function/Setting (bold characters indicate initial settings)
DR-HD100 A.OFF*
Selects whether or not to turn OFF the DR-HD100 (HDD unit by FOCUS enhancements) when this device is turned
OFF.
OFF
: Power does not turn OFF.
ON
: Power turns OFF with this device.
MEMO
• The
[
mark is displayed at the upper right of the LCD monitor and viewfinder when the DR-HD100 is con-
nected. If this device is turned OFF before the mark is displayed, power does not turn OFF even if this setting is
ON.
• This setting is canceled and the DR-HD100 does not turn OFF in the following instances.
- 1394 REC TRIGGER item is set to OFF
- VTR mode is set
• When the DR-HD100 power turns off and this device is turned ON again, after 12 seconds, “DR-HD100 power?”
appears on the LCD monitor for 7 seconds.
MENU ALL RESET
Selects whether to reset the menu screen settings to initial settings.
The camera mode and VTR mode menu settings are reset. (The TC PRESET, UB PRESET, and CLOCK ADJUST
settings are not reset.)
CANCEL
: The settings are not reset.
EXECUTE : The settings are reset.
MEMO
• The cursor (
K
) does not move to this item when the VTR is activated.
• If the current menu settings and the factory settings have different FRAME RATE settings, “REBOOT!” is dis-
played for 3 seconds, this device automatically turns off and then turns on.
PAGE BACK
When the cursor is in this position, press the SHUTTER dial once to return to the OTHERS[1/2] menu screen.
DRUM HOUR
Displays the drum usage time.
Use as an estimate for regular maintenance.
The cursor (
K
) does not move to this item.
FAN HOUR
Displays the fan motor usage time.
Use as an estimate for regular maintenance.
The cursor (
K
) does not move to this item.
