PLAYBACK MODE
62
Outputting Audio
Setting
Confirm that this device is in the VTR mode.
(VTR indicator: On)
Earphone terminal output audio
Audio output is as shown in the table below depending on
the MONITOR SELECT switch and AUDIO MONITOR
and PB AUDIO CH [DV] settings on the AUDIO menu
screen.
1.
Display the AUDIO menu screen.
Select the AUDIO item on the TOP MENU screen.
2.
Set the AUDIO menu screen.
• PB AUDIO CH [DV] Items
For HDV format, audio is output to CH1 and CH2 no matter
the settings.
3.
Either of the following operations returns you to the nor-
mal screen.
• Press the STATUS button
or
• Return to the TOP MENU screen, select the EXIT item
and press the SHUTTER dial.
MEMO
The DV format is capable of recording up to 4 channels
when the 12-bit, 32 kHz sampling frequency is employed.
This device records audio on the two channels CH-1 and
CH-2. (4-channel recording is possible in the case of DV
input.)
When this device is used for playback of a tape that was
recorded on another unit with audio recorded on the CH-3
and CH-4 channels, the PB AUDIO CH [DV] item on the
AUDIO menu screen must be set.
After-recording on the CH-3 and CH-4 channels is not pos-
sible.
USER 3
USER 2
USER 1
STATUS
MENU
2
1
ND FILTER
REC
OFF
ON
POWER
WHT.BAL
AUTO
AUDIO
LEVEL
AUTO
CH-1
CH-2
VF BRIGHT
CH-2
CH-1
-
+
AUDIO SELECT
MANU
AUTO
TC
LCD BRIGHT
DISPLAY
TC
UB
FREE
REGEN
GENE.
REC
CAM/VTR
AUDIO menu screen
MONITOR
SELECT switch
VTR indicator
SHUTTER
dial
STATUS
button
CAM/VTR button
CH1/2
: To reproduce the sound (CH-1, CH-2)
recorded during shooting.
MIX
: To reproduce the sound recorded during
shooting (CH-1, CH-2) and the after-
recorded sound (on CH-3 and CH-4)
simultaneously.
CH3/4
: To reproduce the sound after-recorded
on CH-3 and CH-4.
PB AUDIO CH [DV]
AUDIO OUT connector
CH-1
CH-2
CH1/2
CH1
CH2
MIX
CH1+CH3
CH2+CH4
CH3/4
CH3
CH4
MONITOR
SELECT
PB AUDIO CH [DV]
AUDIO MONITOR
CH1/2
MIX
CH3/4
CH-1
-
L/R: CH1
L/R: CH1+CH3
L/R: CH3
BOTH
MIX
STEREO
L/R: CH1+CH2
L: CH1 R:CH2
L/R: CH1+CH2+CH3+CH4
L: CH1+CH3 R: CH2+CH4
L/R: CH3+CH4
L: CH3 R: CH4
CH-2
-
L/R: CH2
L/R: CH2+CH4
L/R: CH4
* In HDV format, you can only select the settings within the bold frame.
63
USING EXTERNAL COMPONENTS
Connecting the Video
Signal Cables
Connecting the IEEE1394 Cable
To reduce the emission of unwanted radio waves, be sure to
attach the provided clamp filter as shown in the figure below.
• Attach the clamp filter as close to this device as possible,
as shown in the figure.
• Set the IEEE1394 switch on the left panel of this device.
CAUTION
When connecting the IEEE1394 cable from/to Camcorder,
VCR and other IEEE1394 device, make sure the following
instructions, otherwise the IEEE1394 circuit device may be
destroyed.
• Turn the power of both devices OFF and connect the
IEEE1394 cable.
• Do not insert incorrectly (in reverse) the IEEE1394 cable
end to IEEE1394 port of both devices.
• Do not connect the IEEE1394 cable under the condition
of static electricity.
• Turn the power of both devices OFF when changing the
IEEE1394 switch from/to HDV/DV.
Displaying Alarms
• CHANGE 1394 SWITCH
Displayed when the setting for the input/output video format
from the IEEE1394 connector and the setting for the
IEEE1394 switch are different.
Set the IEEE1394 switch so it matches the video format.
DV
: DV format
HDV
: HDV format
IEEE 1394
CH2-AUDIO OUT-CH1 VIDEO
IEEE1394 switch
Clamp filter
Wind once
IEEE 1394
IEEE 1394
X
C H A N G E 1 3 9 4 S W I T C H
