JVC GY-HD110 Page 18 Instructions Manual Download

Page: 18 / 51

PREPARATIONS

Attaching the Zoom Lens

Loosen the mount ring.

Attach the lens with its pin aligned with the hole in the
mount.

Tighten the mount ring.

Connect the cable connector.

Clamp the lens cable.

CAUTION

• Be sure to tighten the mount ring completely. Incomplete

tightening may result in the lens dropping off or disturbed
back focus.

• Set the GY-HD110’s power switch to “OFF” before the

zoom lens is attached or detached.

Attaching the Microphone (Provided)

Connect the provided microphone to the microphone holder.
Provided microphone is a phantom microphone.

Turn the knob on the microphone holder anticlockwise to
loosen it and open the microphone holder.

Place the microphone in the microphone holder.
Place the microphone toward the front to prevent it from
interfering with the cassette cover.

Turn the knob on the microphone holder clockwise to
secure the microphone.

Connect the microphone cable to the INPUT1 or INPUT2
input connector on the GY-HD110.

Attach the microphone cable to the clamp.

Make sure to perform the correct setting for use of a phan-
tom microphone.

See page 48.

How to Attach the Viewfinder

To attach the viewfinder, slide it in the direction of the arrow.

To take off the viewfinder, pull the knob in the direction of the
arrow as you slide the viewfinder.

Hole

Clamp

1. 3.

Knob

Microphone

holder

Clamp

INPUT1, 2 connector

Knob

Taking off the viewfinder

PREPARATIONS

Inserting an SD Memory Card

By using an SD memory card, you can save and call up menu
settings and camera settings for this camcorder.

See “FILE MANAGE Menu Screen” on page 83.

Check that the POWER switch is OFF.

Inserting an SD Memory Card

Open the SD memory card cover.

Face the cutout end of the SD memory card inward and
insert it in the direction of the arrow.

CAUTION

Be sure not to touch the metal connector area of the SD
memory card.

Close the SD memory card cover.

Taking out the SD memory card

Push the SD memory card in the direction of the arrow.
• The SD memory card comes out slightly.

Pull the SD memory card straight out.

About SD Memory Cards

• When you use an SD memory card that was either just pur-

chased or formatted on a device other than this camcorder,
format it on this camcorder.

See page 85.

Recommended SD memory cards
Panasonic: 16 MB or more

• You can write-protect the card so that saved files are not

mistakenly erased. Set the switch on the side of the SD
memory card to the “LOCK” position.

About the Viewfinder Cable

To reduce the emission of unwanted radio waves, be sure to
attach the provided core filter as shown in the figure on the
left.

Attach the core filter (black) as close to the camcorder as
possible, as shown in the figure.

SD memory card cover

Cutout

LOCK switch

Core filter (black)

Summary of Contents for GY-HD110




















































Search results

Summary of Contents for GY-HD110

Reviews:

Related manuals for GY-HD110

Brands by name

Popular brands

JVC GY-HD110, Instructions Manual

Search results

Summary of Contents for GY-HD110

Reviews:

Related manuals for GY-HD110

Brands by name

Popular brands