JVC GR-X5EE Instructions Manual Download

Page: 20 / 64

MasterPage: Advan_Heading0_Right

NOTES:

●

The time code cannot be reset.

●

During fast-forwarding and rewinding, the time
code indication does not move smoothly.

●

The time code is displayed only when “TIME
CODE” is set to “ON”. (

墌

pg. 36)

Quick Review

Enables to check the end of the last recording.

Press

QUICK REVIEW

(

) during the

record-standby mode.

Tape is rewound for about several seconds

and played back automatically, then pauses in
the record-standby mode for the next shot.

●

Distortion may occur at start of playback. This is
not a malfunction.

Recording from the Middle of a Tape

Play back a tape or use blank search

(

墌

pg. 21) to find the spot at which you want to

start recording, then engage the still playback
(pause) mode. (See the right column.)

Set the power switch to “

” or “

” while

pressing down the lock button located on the
switch, then start recording.

Load a cassette. (

墌

pg. 16)

Set the

VIDEO/MEMORY

switch to “VIDEO”.

Set the power switch to “PLAY” while

pressing down the lock button located on the
switch.

To start playback, press

To stop playback, press

●

During stop mode, press

to rewind, or

fast-forward the tape.

To control the speaker volume

Slide the power zoom lever (

VOL. +, –

) towards

“+”

to turn up the volume, or towards

“–”

to turn

down the volume.

NOTES:

●

The playback picture can be viewed in the LCD
monitor or on a connected TV. (

墌

pg. 22)

●

If Stop mode continues for 5 minutes when power
is supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the power
switch to “OFF”, then to “PLAY”.

●

When a cable is connected to the S/AV connector,
the sound is not heard from the speaker.

Still Playback (Pause)

Pauses during video playback.

Press

during playback.

To resume normal playback, press

again.

●

If still playback continues for more than about
3 minutes, the camcorder’s Stop mode is
automatically engaged.

Normal Playback

Speaker

Lock Button

VIDEO/MEMORY

Power Switch

MENU

VOL. +, –

VIDEO PLAYBACK

GR-X5PAL.book Page 20 Thursday, April 7, 2005 7:23 PM

Summary of Contents for GR-X5EE

































































Search results

Summary of Contents for GR-X5EE

Reviews:

Related manuals for GR-X5EE

Brands by name

Popular brands

JVC GR-X5EE, Instructions Manual

Search results

Summary of Contents for GR-X5EE

Reviews:

Related manuals for GR-X5EE

Brands by name

Popular brands