26
Playback Zoom
(GR-SXM600AS, GR-SXM300AG/
AS/AA, GR-SX260AG only)
To magnify the recorded image up to 10X at any
time during playback. Make sure that the TBC
mode is activated.
1)
Press PLAY
R
to find the scene of interest.
2)
Press ZOOM (
T/W
)
E
. Pressing
T
zooms in. To
end zoom press and hold
W
until magnification
returns to normal. Or, press STOP
Y
and then
press PLAY
R
.
• Due to digital image processing, the quality of the
image may suffer.
Animation And Time-Lapse
The remote control lets you set/release interval
time and recording time without setting REC TIME/
INT. TIME (
pg. 21) in SYSTEM MENU.
Animation
Each time ANIM.
I
is pressed, the recording time
changes in the following order: 1/4S, 1/2S, 1S, 5S
and no indication (off).
Time-Lapse
Each time REC TIME
I
is pressed, the recording
time changes in the following order: 1/4S, 1/2S,
1S, 5S and no indication (off). Each time INT. TIME
d
is pressed, the interval time changes in the
following order: 15S, 30S, 1MIN, 5MIN and no
indication (off).
Insert Editing
You can record a new scene onto a previously
recorded tape. Only the video signal is recorded in
this mode.
1)
Set the Power Switch
@
to “
” while pressing
down the Lock Button
!
located on the switch.
2)
Play back the tape, locate the edit-out point and
press PAUSE
a
.
Press and hold COUNTER R/M
w
for more than 1 second to reset the tape
counter, then press it again for less than
1 second so that “M” appears.
3)
Press REW
T
to go a little beyond the beginning
of the scene you want to replace, press PLAY
R
to view the recorded tape, and press PAUSE
a
exactly at the edit-in point where the new scene
should start.
4)
While holding down INSERT
U
, press and
release PAUSE
a
.
w
appears.
5)
To begin Insert Editing, press START/STOP
O
.
When the counter reaches “0:00:00”, editing
stops automatically and the camcorder enters
the Insert-Pause mode. To end Insert Editing,
press STOP
Y
.
• During Insert Editing, the original audio will be
heard from the speaker.
• After step
4)
, “Retake” (
pg. 13) can be
performed.
• The tape may stop slightly before or after the
designated end point, and noise bars may appear.
Neither indicates a defect in the unit.
GR-SXM600AS_EN_Malaysia
11/6/03, 02:32 PM
26
Black