16
MENU SETTINGS
paper fills the screen. If it is difficult to focus on
the white paper, adjust focus manually (
pg.11,
“Auto/Manual Focus”). Press the MENU Wheel
1
in until “MWB”
}
begins blinking. When the
setting is completed, “MWB”
}
stops blinking.
• Once you adjust white balance manually, the
setting is retained even if the power is turned
off or the battery is removed.
• White balance cannot be used when the
“SEPIA” or “B/W:MONO” (
pg. 14 “Digital
Effects”) mode is activated.
Allows you to superimpose one of eight preset
titles.
•
]
shows the selected title which remains until
OFF is selected.
Adjust the settings for TITLE.
SIZE
: When “LARGE” is selected, the title
is twice enlarged vertically than
“NORMAL”.
SCROLL
: When “ON” is selected, the title is
scrolled from right to left.
To set “SIZE” or “SCROLL”, rotate the MENU
Wheel
1
to select the desired item and press it.
When the setting begins blinking, rotate the
MENU Wheel
1
until the correct setting appears
and then select it. The setting stops blinking.
SYSTEM MENU
SYSTEM MENU 1
Allows you to set the tape length depending on
the tape used: T30=30 minutes, T45=45 minutes,
T50=50 minutes, T60=60 minutes.
• Tape remaining time
.
is correct only if the
correct tape length has been selected.
FULL:
Makes all of the indications appear on the
LCD monitor/viewfinder during playback or
recording.
SIMPLE:
Makes the following indications
disappear from the LCD monitor/viewfinder during
recording or playback
0
, tape remaining
time
.
,
, tape length
;
.
ON:
On-screen indications are displayed.
OFF:
On-screen indications are turned off except
Date/Time, Instant Title and Warning Indication.
To adjust the brightness of the LCD monitor,
perform the following steps quickly (within approx.
1 second by each interval):
1)
Select “LCD BRIGHT” in SYSTEM MENU. The
“BRIGHT ON” message appears.
2)
Press the BRIGHT Wheel
1
in to return to
normal screen.
3)
Rotate the BRIGHT Wheel
1
to display the
bright level indicator
_
.
4)
Rotate the BRIGHT Wheel
1
until the
appropriate brightness is reached. After the
BRIGHT Wheel
1
is released, the indicator
soon disappears and adjustment is completed.
The date/time appears in the camcorder or on a
connected monitor (set DATE/TIME in SYSTEM
MENU first
pg. 9).
• The selected display will be recorded. If you do
not want to record the display, select “OFF”
before shooting.
• In the AUTO DATE mode, the camcorder
records the date for about 5 seconds when
recording is initiated after the date is changed,
a cassette is loaded, or AUTO DATE is
selected. The date is replaced after 5 seconds
with “AUTO DATE” but this is not recorded.
Allows you to set the current date and time.
(
pg. 9)
TITLE
TITLE SETUP
TAPE LENGTH
DISPLAY
OSD OUTPUT
LCD BRIGHT
DATE/TIME DISP.
DATE/TIME SET
GR-FXM42EN(EK)2.fm Page 16 Friday, December 2, 2005 9:46 AM
